본문 바로가기
[학술저널]

구속 운동을 고려한 병렬기구 기계의 기상측정 정확도 개선

  • 학술저널

구속 운동을 고려한 병렬기구 기계의 기상측정 정확도 개선

Accuracy Improvement of On-Machine Measurement for the Parallel Kinematic Machine Considering Constraint Motion

이훈희(경북대학교) 이동목(맥스로텍) 양승한(경북대학교)

DOI : 10.7736/KSPE.2019.36.5.463

표지

북마크 0

리뷰 0

이용수 0

피인용수 0

초록

The parallel kinematic machine (PKM), which is applied Exechon mechanism, is efficiently used for manufacturing industry due to its agile movement, flexibility and high rigidity. On-Machine measurement (OMM) in high-dof manufacturing machines such as the PKM and five-axis machine tools has importantly used for processed part measurement, coordinate system set and machine performance evaluation. In this study, measurement and compensation of touch probe offset, which occurs measurement error of the OMM, are carried out for the PKM. A dependent rotational motion is occurred due to kinematic constraint, and causes non-constant offset of a touch probe. The dependent rotational motion is calculated via inverse kinematics analysis. The probe offset is accurately measured using a master ring with considering the analyzed dependent rotational motion angle. In addition, measurement procedure to eliminate the offset induced measurement error is presented. To verify the proposed technique, circular tests using a master ring and commercial touch probe on the PKM were performed. Circularity measurement deviation of a master was reduced 65% without the PKM’s kinematic error calibration.

목차

1. 서론
2. 병렬기구 기계의 구속 운동 분석
3. 종속적 회전 운동을 고려한 터치프로브 오프셋 측정 및 보정
4. 실험
5. 결론
REFERENCES

참고문헌(0)

리뷰(0)

도움이 되었어요.0

도움이 안되었어요.0

첫 리뷰를 남겨주세요.
Insert title here