메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 2001년도 동계학술발표회 논문집
발행연도
2001.11
수록면
99 - 103 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
An analytical method for cycle simulation of condenser-compressor sub-system has been developed to improve the performance of a household refrigerator and to optimize the configuration of sub-condenser installed in the machine room. The inlet state of the sub-condenser was predicted by the simple compressor model based on the measured data sets at suction and discharge of the actual refrigerator compressor. The sub-condenser was modeled using the effectiveness-NTU method to evaluate the performance, and the values obtained from this modelling were compared with the experimental results. The maximum COP was achieved with the optimization process conducted to find the proper diameters and spacings of fin and tube for a wave shaped sub-condenser inside the fixed volume. Both the fan power obtained from the fan performance curve and the compressor power from simple compressor modeling were considered in calculation of system COP. The simulations showed that the system performance was improved for the smaller diameter tubes closely spaced and the larger diameter wires densely spaced.

목차

ABSTRACT

1. 서론

2. 해석 모델

3. 응축기 해석 및 최적화

4. 결론

참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-553-015418438