본문 바로가기
[학술저널]

  • 학술저널

Seung-Man Seo Jin-Ha Kang Hyun-A Lim

UCI(KEPA) : I410-ECN-0101-2009-586-017618368

초록

Many researches for extensive uses of Hanji have been performed. With the advent of an information-oriented age, the development of Hanji which is printable has been considered as a new field of study. Since Hanji has many drawbacks in comparison with common printing papers, that is, rougher surface, huger absorption of ink and lower physical properties and printabilities. Improving the properties and printabilities of Hanji is therefore the most important work to deal with. This study was conducted to find out useful mixed agents for surface sizing suitable for printable Hanji. Four surface sizing agents (CMC, corn starch, PVA, AKD) were applied for mixture in this study. The physical properties of surface sized Hanji were measured. Results obtained were as follows.
Based on designated agents according to concentration, each of the mixed agents was prepared. The kinds of mixture were corn starch (3%) and PVA (5%), corn starch (3%) and AKD (0.1%), corn starch (3%) and CMC (1%), AKD (0.1%) and CMC (1%), AKD (0.1%) and PVA (5%), CMC (1%) and PVA (5%). Each mixed surface sizing agents was included with these ratios (100:0, 90:10, 70:30, 50:50, 30:70, 10:90, 0:100) respectively. All the mixed agents improved the physical properties and printabilities of Hanji. Among them, mixed agent of CMC (1%) and corn starch (3%) with 90:10 ratio is superior to the others for not only smoothness but also ink printability. In view of the result achieved, it is regarded that it can be fit for using Hanji as a printing paper and turned out to be a good contribution to Hanji industry.

목차

ABSTRACT
1. Introduction
2. Materials and Methods
3. Results and Discussion
4. Conclusions
Literature Cited

참고문헌(0)

리뷰(0)

도움이 되었어요.0

도움이 안되었어요.0

첫 리뷰를 남겨주세요.
DBpia에서 서비스 중인 논문에 한하여 피인용 수가 반영됩니다.
인용된 논문이 DBpia에서 서비스 중이라면, 아래 [참고문헌 신청]을 통해서 등록해보세요.
Insert title here