메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
대한기계학회 Journal of Mechanical Science and Technology Journal of Mechanical Science and Technology Vol.21 No.12
발행연도
2007.12
수록면
1,937 - 1,947 (11page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Tensile properties and fracture toughness of monolithic aluminum (Al), glass fiber reinforced plastics (GFRPs) and glass fiber/aluminum hybrid laminates (GFMLs) were examined in relation to the fracture processes of plain coupon and single-edge-notched specimens. Elastic modulus and ultimate tensile strength of GFMLs showed characteristic dependences on the kind of Al, fiber orientation and the Al/fiber layer composition ratio. Fracture toughnesses KC and GC of A-GFML-UD were comparable to those of GFRP-UD and were much superior to monolithic Al. However, GFML with a transverse crack parallel to the fiber layer deteriorated largely in toughness. Microscopic observation of the fracture zone in the vicinity of the crack tip revealed various modes of micro-cracks in the respective layers as well as fiber fractures and delamination between fiber/Al layers. Such damage advances in GFMLs dependent on the orientation of the fiber layer and the Al/fiber composition ratio strongly influenced the strength and toughness of GFMLs.

목차

Abstract
1. Introduction
2. Experimental
3. Results and discussion
4. Conclusions
Acknowledgements
References

참고문헌 (26)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-550-016091829