메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
윤현기 (카이스트) 박무룡 유일수 황순찬
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2009년도 유체공학부문 춘계학술대회 논문집
발행연도
2009.5
수록면
112 - 117 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The operating cost is highly affected by a small difference of pump efficiency around 1~2% in a high capacity pump. So, the detailed revision of the design is required. In the present study, the pump performance has been investigated experimentally and numerically with a change of a stagger angle. The axis of rotation of the stagger angle is placed at the center of the sectional area of the blade between the hub and shroud. The stagger angle is set as -2, -1, 1 and 2 degree from the original design. Performance analysis of each stagger angle is achieved with various flow rates. Cavitation characteristic is also studied at this time. The impeller and diffuser have been investigated numerically by using the commercial code CFX, k-w based SST turbulent model, homogeneous flow model and Rayleigh Plesset cavitation model. It shows good performance that the stagger angle is one degree. Its performance is very similar with the original design near the design point, but better than 2~3% at the high flow rate. The result of the cavitation characteristicshows that the net positive section head (NPSH) is lower than 10% compared with the original design.

목차

Abstract
1. 서론
2. 평균 유동장 해석
3. 수치해석 모델
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-550-018663889