메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
안찬훈 (한국생산기술연구원) 김만기 (울산대학교) 최준 (한국생산기술연구원)
저널정보
Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering Vol.35 No.7
발행연도
2018.7
수록면
663 - 668 (6page)
DOI
10.7736/KSPE.2018.35.7.663

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
A separator used by marine engine functions as a purifier by dividing engine oil into pure oil and impurities. By rotating the separator at a high speed between 1800 to 4500 rpm, fine particles of oil inside the separator are centrifuged due to the weight difference when the engine oil is refined. The impurities, so-called sludge, should be manually removed by taking the separator apart from the oil purifier system unless the accumulated sludge is measured and monitored in real time. A manual discharge of the sludge causes an increase of cycle time to clean the engine oil as well as operator exposure of safety risks. Therefore, the development of automatic system with a sludge monitor and an actuator is necessary for ship engine efficiency. In this paper, the pressure difference from the accumulated sludge is monitored via a pressure sensor. By measuring the pressure exerted at the wall surface, the amount of sludge was quantitatively estimated within the error of 0.032-0.091 kg when the oil purifier system has been automated.

목차

1. 서론
2. 제어 시스템 구현원리 및 방법
4. 결론
REFERENCES

참고문헌 (10)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0