지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2018.1
- 수록면
- 83 - 103 (21page)
이용수
초록· 키워드
오류제보하기
In this paper, the problem of interfacial stresses in damaged reinforced concrete beams strengthened with bonded prestressed functionally graded material plate and subjected to a uniformly distributed load, arbitrarily positioned single point load, or two symmetric point loads is developed using linear elastic theory. The adopted model takes into account the adherend shear deformations by assuming a linear shear stress through the depth of the damaged RC beam. This solution is intended for application to beams made of all kinds of materials bonded with a thin FGM plate. The results show that there exists a high concentration of both shear and normal stress at the ends of the functionally graded material plate, which might result in premature failure of the strengthening scheme at these locations. Finally, numerical comparisons between the existing solutions and the present new solution enable a clear appreciation of the effects of various parameters of the beams on the distributions of the interfacial stresses.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Analytical analysis of the interfacial shear stress in RC beams strengthened with prestressed exponentially-varying properties plate
Advances in materials research : AMR
2018 .01
-
Interfacial stresses in RC beam bonded with a functionally graded material plate
Structural engineering and mechanics : An international journal
2016 .01
-
Interfacial stresses in RC beam bonded with a functionally graded material plate
Structural Engineering and Mechanics, An Int＇l Journal
2016 .01
-
Effect of porosity in interfacial stress analysis of perfect FGM beams reinforced with a porous functionally graded materials plate
Structural Engineering and Mechanics, An Int＇l Journal
2019 .01
-
A high-order closed-form solution for interfacial stresses in externally sandwich FGM plated RC beams
Advances in materials research : AMR
2017 .01
-
A new model for adhesive shear stress in damaged RC cantilever beam strengthened by composite plate taking into account the effect of creep and shrinkage
Structural Engineering and Mechanics, An Int＇l Journal
2021 .09
-
Analytical and numerical modeling of interfacial stresses in beams bonded with a thin plate
Advances in computational design
2017 .01
-
Elastic analysis of interfacial stress concentrations in CFRP-RC hybrid beams: Effect of creep and shrinkage
Advances in materials research : AMR
2017 .01
-
Composite aluminum-slab RC beam bonded by a prestressed hybrid carbon-glass composite material
Structural Engineering and Mechanics, An Int＇l Journal
2023 .03
-
Improved analytical method for adhesive stresses in plated beam: Effect of shear deformation
Advances in concrete construction
2019 .01
-
Elastic analysis effect of adhesive layer characteristics in steel beam strengthened with a fiber-reinforced polymer plates
Structural Engineering and Mechanics, An Int＇l Journal
2016 .01
-
New proposal for flexural strengthening of a continuous I-steel beam using FRP laminate under thermo-mechanical loading
Structural Engineering and Mechanics, An Int＇l Journal
2021 .01
-
Elastic analysis effect of adhesive layer characteristics in steel beam strengthened with a fiber-reinforced polymer plates
Structural engineering and mechanics : An international journal
2016 .01
-
Structural bonding for civil engineering structures: New model of composite I-steel-concrete beam strengthened with CFRP plate
Steel and Composite Structures, An International Journal
2021 .11
-
Analysis and modeling of hyperstatic RC beam bonded by composite plate symmetrically loaded and supported
Steel and Composite Structures, An International Journal
2022 .11
-
Renovation of steel beams using by imperfect functionally graded materials plate
Steel and Composite Structures, An International Journal
2021 .12
-
Analysis of functionally graded beam using a new first-order shear deformation theory
Structural engineering and mechanics : An international journal
2016 .01
-
Shear strengthening of deficient concrete beams with marine grade aluminium alloy plates
Advances in concrete construction
2019 .01
-
Hygrothermal effects on the behavior of reinforced-concrete beams strengthened by bonded composite laminate plates
Structural Engineering and Mechanics, An Int＇l Journal
2019 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0