메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
한국광학회 Current Optics and Photonics Journal of the Optical Society of Korea Vol.20 No.6
발행연도
2016.12
수록면
807 - 812 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Transparent film heaters (TFHs) based on Joule heating are currently an active research area. However,TFHs based on an indium tin oxide (ITO) monolayer have a number of problems. For example, heatingis concentrated in only part of the device. Also, heating efficiency is low because it has high sheet resistance(Rs). To address these problems, this study introduced hybrid layers of ITO/Ag/ITO deposited by magnetronsputtering, and the electrical, optical, and thermal properties were estimated for various thicknesses of themetal interlayer. The Rs of ITO(40)/Ag/ITO(40 nm) hybrid TFHs were 5.33, 3.29 and 2.15 Ω/□ for Agthicknesses of 10, 15, and 20 nm, respectively, while the Rs of an ITO monolayer (95 nm) was 59.58Ω/□. The maximum temperatures of these hybrid TFHs were 92, 131, and 145°C, respectively, under avoltage of 3 V. And that of the ITO monolayer was only 32°C. For the same total thickness of 95 nm,the heat generation rate (HGR) of the hybrid produced a temperature approximately 100°C higher thanthe ITO monolayer. It was confirmed that the film with the lowest Rs of the samples had the highestHGR for the same applied voltage. Overall, hybrid layers of ITO/Ag/ITO showed excellent performancefor HGR, uniformity of heat distribution, and thermal response time.

목차

등록된 정보가 없습니다.

참고문헌 (23)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2023-425-000240016