메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
이동은 (과학기술연합대학원대학교) 정희윤 (한국항공우주연구원) 강영석 (한국항공우주연구원) 이동호 (한국항공우주연구원)
저널정보
한국유체기계학회 한국유체기계학회 논문집 한국유체기계학회 논문집 제26권 제2호(통권 제137호)
발행연도
2023.4
수록면
5 - 15 (11page)
DOI
10.5293/kfma.2023.26.2.005

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (5)

초록· 키워드

오류제보하기
In this study, an integrated CFD analysis implementation were conducted for the commercial micro turbojet engine, JetCat P300-RX, which has a maximum thrust of 300 N. A three-dimensional integrated analysis model includes major components of the micro gas turbine engine. A steady-state RANS (Reynolds Averaged Navier-Stokes) analysis was performed using ANSYS CFX V20.2. For the turbulence model and combustion model, the k-ω SST (Shear Stress Transport) model and the EDM (Eddy Dissipation Model) model were applied, respectively. The analysis were performed for various engine speed (RPM) conditions from 30,000 RPM to 106,000 RPM and various altitude conditions from sea level to 3.0 km. And the analysis results were verified by comparing with the actual engine test results. The comparison results showed that most of the performance parameters, such as thrust, exhaust gas temperature (EGT), air flow rate, and compression ratio in all analysis conditions (RPM and altitude) are in good agreement with the ground test results of commercial engines.

목차

ABSTRACT
1. 서론
2. 본문
3. 성능해석 결과
4. 해석 모델 검증
5. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0