본 논문은 백제 사비기 횡혈식석실의 매장 프로세스에 관한 연구이다. 부여지역을 중심으로 익산, 완주, 예산, 보령지역에서 조사된 횡혈식석실 자료를 바탕으로 매장 프로세스를 단계별로 분석하였다. 자료를 토대로 축조과정을 복원하고 백제 사비기 횡혈식석실의 매장 프로세스 양상을 파악하였다. 연구대상 횡혈식석실은 61기로 부여지역에서는 능산리고분군, 능산리(공주대), 능안골고분군, 송곡리 117번지, 염창리고분군, 청마산성, 가중리 산직리, 나복리 건지말, 오수리 큰독골, 합정리고분군, 합정리 갱고개골, 합정리 문냉이골, 익산지역은 쌍릉과 광암리·동촌리, 완주 둔산리(등걸B), 예산 석곡리와 보령 웅천 구룡리와 창암리·황율리에 분포한다. 연구대상 횡혈식석실의 매장 프로세스를 분석하였으며, 석실 축조를 중심으로 축조 전-축조-축조 후로 나누고 축조과정과 상장의례로 구분하여 진행하였다. 석실 축조 전 이루어지는 묘광 굴착은 일반적으로 석실이 지하에 안치되기 때문에 필수적인 작업이며, 백제 사비기 횡혈식석실에서 공통적으로 확인된다. 석실의 벽석축조와 더불어 진행되었던 뒤채움은 최근까지 조사가 활발히 이루어지지 못하였으나 부여 능산리 서고분군, 송곡리 117번지, 그리고 익산 광암리·동촌리를 통해 그 양상을 구체적으로 파악하였다. 매장은 단장 또는 합장 형태로 이루어졌으며, 출토유물 또는 피장자 추정으로 편년이 가능한 8기의 횡혈식석실로 매장형태의 변화과정을 분석하였다. 봉분 축조는 부여 능산리 서고분군과 가중리 산직리 그리고 익산 쌍릉의 봉분 조사 자료를 통해 1차 성토-2차 성토-3차 성토가 이루어짐을 확인하고 4기의 봉분 복원을 시도하였다. 상장의례는 횡혈식석실의 축조과정 속에서 이루어졌음을 인지하고 분석을 시도하였다. 현재 남아있는 자료가 극히 적어 선행된 문헌자료 연구와 공주 송산리고분군과 정지산유적을 비교하여 부여 능산리 서고분군과 능산리사지의 고고학적 자료를 활용하였다. 매장 프로세스 분석 결과 횡혈식석실의 축조과정은 총 3단계로 나누어진다. Ⅰ단계는 석실 축조 전 단계로 묘역 선정과 묘광 굴착, 배수로를 설치한다. Ⅱ단계는 석실이 축조되는 단계로 석재형태의 선택, 석실 조립이 이루어진다. 석실 축조가 완료되면 석실 상부에 1차 성토가 이루어진다. Ⅲ단계는 현실 안으로 피장자 안치와 부장품을 매납하고 석실이 폐쇄되며, 이후 2차 성토인 묘도부 성토가 이루어진다. 동시에 호석을 설치하면서 봉분의 경계를 확정한 것으로 확인된다. 전체 성토인 3차 성토로 마무리하면서 주구가 설치된다. 복원한 축조과정을 토대로 상장의례와 함께 백제 사비기 횡혈식석실의 매장 프로세스를 부여 능산리 서고분군을 중심으로 복원하였다. Ⅰ단계에서는 피장자가 사망 직후 횡혈식석실의 축조가 시작되면서 피장자는 빈전에 안치되었으며, 빈전으로 이동되기까지 의례가 행해졌을 것으로 보인다. Ⅱ단계에서는 피장자가 빈전에 안치되는 기간에 죽은 자를 애도하는 것뿐만 아니라 대외적인 목적을 가지고 이 기간을 이용한 것으로 보인다. Ⅲ단계는 석실 축조가 완료되어 석실에 피장자 안치와 부장품을 매납한다. 앞선 Ⅰ단계와 마찬가지로 빈전에서 석실로 시신을 운구하는 과정에서도 의례가 행해졌을 것으로 보인다. 백제 사비기 횡혈식석실은 부여, 익산, 완주, 예산, 보령지역에 다양하게 분포하고 있다. 이미 백제 사비기 횡혈식석실을 축조하기 위해 설계도라는 하나의 계획이 존재했던 만큼 매장 프로세스의 공유는 백제 사비기에 보편적으로 이루어졌던 것으로 보인다. 매장 프로세스의 공유는 석재형태, 뒤채움 성토 방법, 호석 등과 같이 석실 축조와 봉분 축조에 사용되었을 축조기법들에서 확인할 수 있다. 이러한 축조기법들은 중앙지역뿐만 아니라 지방에서도 확인 가능하며, 특히 왕릉급 무덤으로 비정되고 있는 능산리고분군 일대의 횡혈식석실에 반영된 축조기법들과 비교해 보았을 때 뒤처지지 않은 모습들로 축조되었다. 이를 보면 충분히 중앙지역과 지방간 매장 프로세스의 공유가 이루어졌음을 확인할 수 있다.
The present dissertation is a study about the burial process for stone chambers with corridor-style entrances during the Sabi period of Baekje. The study analyzed the burial process stage by stage on the basis of data concerning stone chambers with corridor-style entrances examined in the Iksan, Wanju, Yesan, and Boryeong regions with a focus on the Buyeo region. The study restored the construction process based on this data and identified aspects of the burial process for stone chambers with corridor-style entrances during the Sabi period of Baekje. The study included 61 stone chambers with corridor-style entrances. These were spread out across both the Buyeo and Iksan region, with the Buyeo region including the Ancient Tombs in Neungsan-ri, Neungsan-ri(Kongju National University), the Ancient Tombs in Neungangol, 117 Songgok-ri, the Ancient Tombs in Yeomchang-ri, Cheongmasanseong, Gajung-ri and Sanjik-ri, Nabok-ri Geonjimal, Osu-ri Keundokgol, the Ancient Tombs in Hapjeong-ri, Hapjeong-ri Gaenggogaegol, and Hapjeong-ri Munnaengigol, while the Iksan region included the Twin Tombs, Gwangam-ri and Dongchon-ri, Wanju Dunsan-ri (Deunggeol B), Yesan Seokgok-ri, Boryeong Ungcheon Guryong-ri, and Changam-ri and Hwangyul-ri. The study analyzed the burial process for stone chambers with corridor-style entrances by dividing stone chamber construction into pre-construction―construction―and post-construction and by distinguishing between the construction process and funeral rites. The excavation of the grave pit, which occurs before the construction of the chamber, is essential work because the stone chamber is generally laid underground, and this feature is commonly found in stone chambers with corridor-style entrances from the Sabi period of Baekje. Carried out with the wall stone construction of the stone chamber, backfilling was not actively researched until recently, but characteristics of backfilling have been identified in detail through the western tombs in Neungsan-ri in Buyeo, the 117 Songgok-ri site, and the Gwangam-ri and Dongchon-ri sites in Iksan. The burials were in the form of either single or group burial, and the study analyzed the changing process of burial by using 8 stone chambers with corridor-style entrances, which could be chronologically recorded by estimating excavated artifacts and the persons buried. Regarding burial mound construction, the study confirmed a 1st mounding, a 2nd mounding, and a 3rd mounding by using burial mound research data from the western tombs in Neungsan-ri in Buyeo, the Gajung-ri and Sanjik-ri sites, and the Twin Tombs in Iksan, and subsequently attempted to restore 4 burial mounds. The study attempted an analysis upon recognizing funeral rites were carried out amidst the process of constructing stone chambers with corridor-style entrances. As very little data remains, the study compared the preceding literature with the Ancient Tombs in Songsan-ri in Gongju and the Jeongjisan archaeological site and utilized archaeological data from the western tombs in Neungsan-ri, Buyeo and the Neungsan-ri temple site. The results of analyzing the burial process show how the construction process for stone chambers with corridor-style entrances was divided into 3 stages. As the stage prior to constructing the stone chamber, stageⅠ includes selecting grave boundaries, excavating the grave pit, and installing the drainage. As the stage of constructing the stone chamber, stage Ⅱ includes selecting the stone materials and assembling the stone chamber. Once construction of the stone chamber is completed, the 1st mounding is carried out in the upper part of the stone chamber. In stage Ⅲ, the person to be buried is laid inside the main chamber along with the grave goods, and the stone chamber is then closed after which the 2nd mounding―the mounding of the grave entrance area―is carried out. The study also confirmed hoseok(stones around a tomb) were installed to define the boundaries of the burial mound. The tomb is then finished with the 3rd mounding―the overall mounding―as the jugu(trench encircling a grave) is installed. Based on the restored construction process, the study restored the burial process for stone chambers with corridor-style entrances in the Sabi period of Baekje, along with its funeral rites, with a focus on the western tombs of Neungsan-ri, Buyeo. In stageⅠ, the person to be buried is placed in the binjeon(coffin hall) as construction begins for the stone chamber with a corridor-style entrance immediately after the death of the person, and it seems like ceremonies were held before the body was moved to the binjeon. In stage Ⅱ, while the body is in the binjeon, the dead person is mourned, and this period of time is also used for foreign or diplomatic purposes. In stage Ⅲ, the construction of the stone chamber is completed, and the body and the grave goods are placed in the stone chamber. Similar to stage Ⅰ, it seems like ceremonies were also held during the process of moving the body from the binjeon to the stone chamber. Stone chambers with corridor-style entrances in the Sabi period of Baekje are spread across diversely throughout the Buyeo, Iksan, Wanju, Yesan, and Boryoeng regions. Because a type of blueprint referred to as the layout for constructing stone chambers with corridor-style entrances existed, it seems like the sharing of the burial process was universally carried out. The sharing of the burial process confirms construction techniques used in the construction of the stone chamber and burial mound, such as stone materials, backfill mounding methods, and hoseok. These construction techniques are found not only in central areas but also in the local region, and when compared to the construction techniques incorporated in the stone chambers with corridor-style entrances from the Ancient Tombs in Neungsan-ri, which are determined to be royal level tombs, these construction techniques do not fall behind. This fully confirms how burial processes were shared between central areas and the local region.
Ⅰ. 머리말 11. 연구사 검토 및 문제제기 12. 연구방법 4Ⅱ. 백제 사비기 횡혈식석실 현황 61. 백제 사비기 횡혈식석실의 정의 62. 연구대상 유적 현황 7Ⅲ. 매장 프로세스 분석 151. 축조과정 152. 상장의례 45Ⅳ. 백제 사비기 횡혈식석실의 매장 프로세스 481. 축조과정의 단계 482. 매장 프로세스의 단계 543. 매장 프로세스의 공유 57Ⅴ. 맺음말 59□ 참고문헌 61□ Abstract 64