인문학
사회과학
자연과학
공학
의약학
농수해양학
예술체육학
복합학
DBpia AI
AI 에이전트
AI 아이디어
AI 리더
AI 뷰어
Citeasy
크롬 서지관리 다운로드
개인구독
소속 기관이 없으신 경우, 개인 정기구독을 하시면 저렴하게
논문을 무제한 열람 이용할 수 있어요.
지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
초록·키워드
The purpose of this study is to deduct BIPV system installation current status and characteristics of BIPV module size and output through case analysis of building integrated photovoltaic systems applied in public buildings by new & renewable energy installation obligation system from 2007 to 2012 and present BIPV system supply performance improvement plan.
Analysis by year, capacity, subject organization, facility categorization of BIPV system and size, output by unit area of BIPV module was analyzed.
The analyzed results are as follows.
(1) BIPV system was installed in 71 locations of 2.7MW from 2007 to 2012 and frequency by BIPV system installation capacity range was highest in 10kW∼20kW with 31%. Also, it was most applied in public work facilities with 33.8% and next was education·society educational institutes with 26.8%. (2) BIPV module was most installed in building facades instead of curtain walls in which form was G-to-G double-glaing type and G-to-T type with proportion of 38% each. (3) BIPV module size was all under 2㎡ and most size was 1.0∼1.5㎡. This size is scarce to replace building material with BIPV module. Therefore, research development on large-scale BIPV module is required. (4) BIPV module output by unit area was most frequent in 100∼125W/㎡. Based on these results, it is thought that 9∼10㎡ installation area is required to install 1 kW BIPV system. Also, high-efficiency of BIPV module is required to install BIPV system of more capacity in limited area.
Analysis by year, capacity, subject organization, facility categorization of BIPV system and size, output by unit area of BIPV module was analyzed.
The analyzed results are as follows.
(1) BIPV system was installed in 71 locations of 2.7MW from 2007 to 2012 and frequency by BIPV system installation capacity range was highest in 10kW∼20kW with 31%. Also, it was most applied in public work facilities with 33.8% and next was education·society educational institutes with 26.8%. (2) BIPV module was most installed in building facades instead of curtain walls in which form was G-to-G double-glaing type and G-to-T type with proportion of 38% each. (3) BIPV module size was all under 2㎡ and most size was 1.0∼1.5㎡. This size is scarce to replace building material with BIPV module. Therefore, research development on large-scale BIPV module is required. (4) BIPV module output by unit area was most frequent in 100∼125W/㎡. Based on these results, it is thought that 9∼10㎡ installation area is required to install 1 kW BIPV system. Also, high-efficiency of BIPV module is required to install BIPV system of more capacity in limited area.
본문·목차
인공지능 문자 인식 모델을 통해 추출된 텍스트로, 일부 오타나 오류가 포함될 수 있으나 지속적으로 개선 중입니다.
오류를 발견하셨다면 해당 부분을 드래그한 후 ' 를 통해 신고해주세요.
오류를 발견하셨다면 해당 부분을 드래그한 후 ' 를 통해 신고해주세요.
최근 본 자료 전체보기
UCI(KEPA) : I410-ECN-0101-2014-500-003667954
