인문학
사회과학
자연과학
공학
의약학
농수해양학
예술체육학
복합학
개인구독
소속 기관이 없으신 경우, 개인 정기구독을 하시면 저렴하게
논문을 무제한 열람 이용할 수 있어요.
지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
The internal flow field simulation of the cyclone separator of different structures
The internal flow field simulation of the cyclone separator of different structures
초록·키워드
In view of the increasingly serious problems of oily waste water treatment, this paper encompasse d development structure parametric and operating condition of defiling hydrocyclone by CFD simulation. The large eddy simulation was used to calculate the hydrocyclones of different structures. The main aim was to study the effects of different structure sizes and operating conditions on the performances of hydrocyclone. The results showed that in the straight pipe hydrocyclone and taper pipe hydrocyclone, the pressure and flowing radius were positively correlated. The pressure decreased with the reducing of the flowing radius, and the pressure reaches the lowest point at the central axis part. If tangential speed increased, the centrifugal force would be strengthened which can help oil drop move to the center part. Therefore, the separation efficiency was improved. On the contrary, the separation efficiency would decrease. However, it was not true that the bigger the tangential speed was, the better it was. If the tangential speed was too fast, the shear stress borne by the oil drop would increase which may cause the oil drop breakage and would aggravate the oil drop emulsification. This was not benefit to improve the separation efficiency. The oil and water separation effect of the taper pipe hydrocyclone was better than that of straight pipe hydrocyclone.
본문·목차
인공지능 문자 인식 모델을 통해 추출된 텍스트로, 일부 오타나 오류가 포함될 수 있으나 지속적으로 개선 중입니다.
오류를 발견하셨다면 해당 부분을 드래그한 후 ' 를 통해 신고해주세요.
오류를 발견하셨다면 해당 부분을 드래그한 후 ' 를 통해 신고해주세요.
최근 본 자료 전체보기
UCI(KEPA) : I410-ECN-0101-2017-550-002052011