인문학
사회과학
자연과학
공학
의약학
농수해양학
예술체육학
복합학
DBpia AI
AI 에이전트
AI 아이디어
AI 리더
AI 뷰어
Citeasy
크롬 서지관리 다운로드
개인구독
소속 기관이 없으신 경우, 개인 정기구독을 하시면 저렴하게
논문을 무제한 열람 이용할 수 있어요.
지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
피인용 0
초록·키워드
In this study, mechanical properties of coir/PLA composites were studied under different water immersion time. Coir/PLA composite were prepared using coir fiber treated with NaOH and NaOH followed by soaking in acrylic acid (AA) 0.5% solution with varying immersion time. Fraction volume of the fibers in the PLA composites was fixed at 40%. Water absorption, tensile and flexural properties of these composite were analyzed. The tensile and flexural test are conducted according to ASTM standard D3039 and ASTM D790, respectively.
The water uptake process for all specimens sharply increased and approach saturation after 169h. Th e composite with NaOH treated of fiber was the highest to absorb the water. Overall, composites with NaOH followed by AA as a chemical treatment of coir fiber have greater tensile and bending strength than those of untreated and NaOH treated fiber. Based on the immersion time for coir in the AA solution, the maximum tensile and bending strength of composites occur at 0.5h for all water immersion time of composites. The flexural properties of PLA/coir composites shows a decrease tendency when 6h water immersion. Tensile fracture surface morphologies of the composites were observed using SEM method.
The water uptake process for all specimens sharply increased and approach saturation after 169h. Th e composite with NaOH treated of fiber was the highest to absorb the water. Overall, composites with NaOH followed by AA as a chemical treatment of coir fiber have greater tensile and bending strength than those of untreated and NaOH treated fiber. Based on the immersion time for coir in the AA solution, the maximum tensile and bending strength of composites occur at 0.5h for all water immersion time of composites. The flexural properties of PLA/coir composites shows a decrease tendency when 6h water immersion. Tensile fracture surface morphologies of the composites were observed using SEM method.
본문·목차
인공지능 문자 인식 모델을 통해 추출된 텍스트로, 일부 오타나 오류가 포함될 수 있으나 지속적으로 개선 중입니다.
오류를 발견하셨다면 해당 부분을 드래그한 후 ' 를 통해 신고해주세요.
오류를 발견하셨다면 해당 부분을 드래그한 후 ' 를 통해 신고해주세요.
최근 본 자료 전체보기
UCI(KEPA) : I410-ECN-0101-2009-550-019126952
