인문학
사회과학
자연과학
공학
의약학
농수해양학
예술체육학
복합학
DBpia AI
AI 에이전트
AI 아이디어
AI 리더
AI 뷰어
Citeasy
크롬 서지관리 다운로드
지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
초록·키워드
The blowing process is advantageous in that it is possible to quickly produce complex shapes of products at a low cost. However, there is a problem that burrs are generated during the process of forming the two metal molds in contact with each other. In this paper, we propose a deburring system using non-contact hot air and perform optimization research for effective deburring. Differential scanning calorimetry (DSC) analysis of high-density polyethylene was carried out to confirm the melting point of about 130℃. Based on the DSC experimental data, it was confirmed whether the hot air was deburred between 130℃ and 500℃. As a result, it was confirmed that the deburring was effective at about 500℃. The temperature of the hot air was fixed at about 500℃ and the feeding speed of the conveyor belt was experimented. As a result, effective deburring was possible when the feeding speed was 4 m/s ~ 5 m/s.
본문·목차
인공지능 문자 인식 모델을 통해 추출된 텍스트로, 일부 오타나 오류가 포함될 수 있으나 지속적으로 개선 중입니다.
오류를 발견하셨다면 해당 부분을 드래그한 후 ' 를 통해 신고해주세요.
오류를 발견하셨다면 해당 부분을 드래그한 후 ' 를 통해 신고해주세요.
최근 본 자료 전체보기
