메뉴 건너뛰기
소속 기관 / 학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
고객센터 ENG
주제분류

논문 기본 정보

저자정보
(Silicon Works) (Kumoh National Institute of Technology)
저널정보
대한전자공학회 JOURNAL OF SEMICONDUCTOR TECHNOLOGY AND SCIENCE Journal of Semiconductor Technology and Science Vol.20 No.6
오류 신고하기

피인용 0

검색

    초록·키워드

    A successive approximation register (SAR) analog-to-digital converter (ADC) with input offset calibration is proposed to reduce input offset mismatches between multiple ADCs. The proposed input offset calibration is performed by controlling the capacitors used for scaling the input range of the SAR ADC in the capacitor digital-to-analog converter (CDAC) without the addition and modification of analog circuits. To verify the proposed input offset calibration, a 10-bit 10-MS/s SAR ADC with asynchronous architecture is implemented by using a 180-nm CMOS process with a supply voltage of 1.8 V. The power consumption and active area of the implemented SAR ADC are 2.29 mW and 0.207 ㎟, respectively. The control logic circuits added for the proposed input offset calibration occupy an area of 0.032 ㎟. The proposed input offset calibration of the SAR ADC reduces the input offset of ten LSBs to less than that of three LSBs. The measured DNL and INL are +0.60/−0.94 LSBs and +0.89/−0.93 LSBs, respectively. The ENOB is measured to 9.29 bits for the analog input signal with Nyquist frequency.

    최근 본 자료 전체보기

      UCI(KEPA) : I410-ECN-0101-2021-569-001450959