메뉴 건너뛰기
소속 기관 / 학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
고객센터 ENG
주제분류

논문 기본 정보

저자정보
(순천대학교) (순천대학교)
저널정보
한국연소학회 한국연소학회지 한국연소학회지 제26권 제2호
오류 신고하기

피인용 8

검색

    초록·키워드

    In this study, various fractal grids are used to investigate the non-reacting turbulent flow characteristics of a circular fractal turbulence generator. The types of fractal grids used as turbulence generators are cross and square, and a total of 24 grids produced by changing the shape parameters are investigated. Also, to compare the characteristics of turbulent flow, a general perforated plate with the same blockage ratio is used together. In the center axis turbulence component results, the two types of fractal grids show different turbulence component tendency depending on their shape parameters, and are investigated individually. As a result of quantitatively confirming the difference in turbulence intensity using the percentage difference method, the two types of fractal grids produced stronger turbulence than the conventional grids (perforated plate and mesh). The results of (r, z) plane measurements show that the shape of the turbulent generator significantly affects the turbulent component after nozzle exit. The inhomogeneity of the turbulence component was more severe in the square grid than in the cross and conventional grids, but as the blockage ratio of the square grid increased, the homogeneity of the turbulence component showed a tendency to improve.

    최근 본 자료 전체보기

      UCI(KEPA) : I410-ECN-0101-2021-431-001855571