인문학
사회과학
자연과학
공학
의약학
농수해양학
예술체육학
복합학
DBpia AI
AI 에이전트
AI 아이디어
AI 리더
AI 뷰어
Citeasy
크롬 서지관리 다운로드
개인구독
소속 기관이 없으신 경우, 개인 정기구독을 하시면 저렴하게
논문을 무제한 열람 이용할 수 있어요.
지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
초록·키워드
A vanadium carbide (VC) layer was created by thermal diffusion (TD) method to improve the wear resistance of the pinch roller made of SKD11, which is applied to the production of deformed prestressing concrete (PC) steel bars. To create the VC layer by the TD coating method, the base material of SKD11 material was immersed in a molten vanadium at 1,000°C for 10 hours, and then the surface was polished to prepare a specimen. The VC coating layer showed a production rate of 0.6-0.9 μm/hr, and a VC layer of 0.8 μm was formed during 10 hours of immersion. As a result of performing a ball on disk wear test to measure the specific wear of the base material SKD11 and the VC layer, it was 2.02×10<SUP>-4</SUP> ㎟/N and 0.73×10<SUP>-4</SUP> ㎟/N, respectively, and the wear amount of the VC layer was only 36% worn compared to the base material. The coefficient of friction did not show a significant difference between the base material and the VC layer, 0.683 and 0.644, respectively. When the pinch roller to which the VC layer was applied was applied to an induction heating heat treatment machine that manufactures a deformed PC steel bar, it was confirmed that the wear resistance performance was twice that of the base material.
인공지능 문자 인식 모델을 통해 추출된 텍스트로, 일부 오타나 오류가 포함될 수 있으나 지속적으로 개선 중입니다.
오류를 발견하셨다면 해당 부분을 드래그한 후 ' 를 통해 신고해주세요.
오류를 발견하셨다면 해당 부분을 드래그한 후 ' 를 통해 신고해주세요.
최근 본 자료 전체보기
