인문학
사회과학
자연과학
공학
의약학
농수해양학
예술체육학
복합학
DBpia AI
AI 에이전트
AI 아이디어
AI 리더
AI 뷰어
Citeasy
크롬 서지관리 다운로드
지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
피인용 0
초록·키워드
Electric vehicles are a key component in carbon neutrality policies, and electrical steels used in EV motors must exhibit high magnetic flux density and low core loss. The Fe-Co alloy is known for its high saturation magnetization; however, its brittleness limits its practical applications. The Fe-Co alloy overcame brittleness by adding vanadium, which expands the two-phase coexistence region of the ordered body-centered cubic structure (α phase) and face-centered cubic structure (γ phase). As a result, the α phase with good soft magnetic properties has a stable structure at room temperature. In this study, steel with thicknesses of 0.2 mm and 0.15 mm were heat-treated based on the differential scanning calorimetry (DSC) results to form the α phase, and their structural and magnetic properties were subsequently analyzed. 0.2 mm steel heat-treated at 775 ℃ had low coercivity (50.58 A/m) and a high magnetic flux density of 5000 A/m (2.14 T). 0.15 mm steel heat-treated at 850 ℃ had low coercivity (60.18 A/m) and a high magnetic flux density of 5000 A/m (2.22 T). The increase of coercivity observed at 900 ℃ is attributed to V-rich phases formed at grain boundaries, which likely act as pinning sites. The hysteresis loss of 0.15 mm steels in a DC environment had the lowest value at 800 ℃, while under an AC environment, it had a minimum of 750 to 850 ℃.
본문·목차
인공지능 문자 인식 모델을 통해 추출된 텍스트로, 일부 오타나 오류가 포함될 수 있으나 지속적으로 개선 중입니다.
오류를 발견하셨다면 해당 부분을 드래그한 후 ' 를 통해 신고해주세요.
오류를 발견하셨다면 해당 부분을 드래그한 후 ' 를 통해 신고해주세요.
최근 본 자료 전체보기
UCI(KEPA) : I410-151-26-02-094397443
