메뉴 건너뛰기
소속 기관 / 학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
고객센터 ENG
주제분류

논문 기본 정보

저자정보
(경북대학교 섬유공학과) (단국대학교 섬유시스템공학과) (한양대 유기나노공학과)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제54권 제2호
오류 신고하기

피인용 0

검색

    초록·키워드

    The effects of the stress level and heat treatment temperature on the morphological and physical properties of poly(vinyl alcohol) (PVA) fibers were investigated with regard to treatment time. The PVA fibers were heat treated at three different temperatures (210, 220, and $230^{\circ}C$) and stress levels (0.05, 0.15, and 0.25 g/d). Increase in shrinkage was observed with an increase in the heat treatment time when treated at 220 and $230^{\circ}C$ beyond 15 min, while a little extension was observed at $210^{\circ}C$. The shrinkage in the PVA fibers heat treated at $230^{\circ}C$ increased with a decrease in stress levels, exhibiting a different dependence of the shrinkage on the heat treatment time. The WAXS patterns of the PVA fibers heat treated at $230^{\circ}C$ at 0.15 g/d showed that the crystalline peaks became sharp with time up to 15 min beyond which they became dull. The degree of crystallinity, determined from the density measurement, was maximum when heat treated for 5 min regardless of the temperature and the stress level. However, the degree of crystallinity when further treated at 220 and $230^{\circ}C$ decreased, while that showed little change when treated at $210^{\circ}C$. In addition, the variation of the degree of crystallinity with heat treatment time was in good agreement with that of the degree of amorphous orientation. In the DSC thermograms, a greater dependence of the melting temperature and the heat of fusion on the heat treatment time was observed at higher heat treatment temperatures and lower stress levels.

    최근 본 자료 전체보기