인문학
사회과학
자연과학
공학
의약학
농수해양학
예술체육학
복합학
DBpia AI
AI 에이전트
AI 아이디어
AI 리더
AI 뷰어
Citeasy
크롬 서지관리 다운로드
개인구독
소속 기관이 없으신 경우, 개인 정기구독을 하시면 저렴하게
논문을 무제한 열람 이용할 수 있어요.
지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
피인용 0
초록·키워드
Purpose: This study aims to determine the most suitable material for heat exchangers by analyzing the tensile and fatigue strengths of different types of stainless steel, i.e., AISI 310S, AISI 316L, and AISI 347 after welding and aging at both room and high temperatures.
Methods: Tensile and fatigue tests were performed on three types of stainless steel for heat exchangers using samples aged at 800℃ for 1000 hours and samples that were welded and aged at both room temperature and 800℃. The microstructures of the base material and aged samples were observed using an optical microscope and SEM. The fatigue tests were conducted using a stress ratio of 0.1 and a stress constant test; the fracture surface was then observed using SEM.
Results: Chromium carbides tend to precipitate more in aged stainless steel samples than in the base material. It was found that AISI 316L stainless steel has the best elongation and fatigue strength at room temperature and 800℃.
Conclusion: In terms of aged and welded samples, AISI 316L stainless steel has the highest elongation and endurance limit. In particular, it has the smallest amount of chromium carbide precipitation at 800℃. In conclusion, it is determined to be an excellent heat exchanger material in terms of weldability, formability, and durability.
Methods: Tensile and fatigue tests were performed on three types of stainless steel for heat exchangers using samples aged at 800℃ for 1000 hours and samples that were welded and aged at both room temperature and 800℃. The microstructures of the base material and aged samples were observed using an optical microscope and SEM. The fatigue tests were conducted using a stress ratio of 0.1 and a stress constant test; the fracture surface was then observed using SEM.
Results: Chromium carbides tend to precipitate more in aged stainless steel samples than in the base material. It was found that AISI 316L stainless steel has the best elongation and fatigue strength at room temperature and 800℃.
Conclusion: In terms of aged and welded samples, AISI 316L stainless steel has the highest elongation and endurance limit. In particular, it has the smallest amount of chromium carbide precipitation at 800℃. In conclusion, it is determined to be an excellent heat exchanger material in terms of weldability, formability, and durability.
본문·목차
인공지능 문자 인식 모델을 통해 추출된 텍스트로, 일부 오타나 오류가 포함될 수 있으나 지속적으로 개선 중입니다.
오류를 발견하셨다면 해당 부분을 드래그한 후 ' 를 통해 신고해주세요.
오류를 발견하셨다면 해당 부분을 드래그한 후 ' 를 통해 신고해주세요.
최근 본 자료 전체보기
