인문학
사회과학
자연과학
공학
의약학
농수해양학
예술체육학
복합학
DBpia AI
AI 에이전트
AI 아이디어
AI 리더
AI 뷰어
Citeasy
크롬 서지관리 다운로드
개인구독
소속 기관이 없으신 경우, 개인 정기구독을 하시면 저렴하게
논문을 무제한 열람 이용할 수 있어요.
지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
피인용 0
초록·키워드
The interest in nylon composites is growing as a result of their high strength, high toughness, and low coefficient of friction. For a while, researchers have used a variety of fillers to improve the mechanical and tribological characteristics of nylons. Despite extensive research, the current study is being carried out to explore the various mechanical behaviors of a nylon 6 hybrid polymer matrix composite due to its strength, stiffness, and lightness. In this work, silicon carbide and mica were used as fillers, and nylon 6 was used as the matrix. Mica was taken at 2.5, 5, and 7.5 wt%, and silicon carbide was taken at 2 wt%. After the ingredients were combined in a twin screw extruder, the samples were made using an injection moulding procedure. According to ASTM D256, D790, and D638, the specimens for the impact, flexural, and tensile tests were prepared. Tests and analyses were done on the impact, flexural, and tensile strengths. In tensile and flexural testing, the strength of the nylon 6 composite with 2 wt% silicon and 7.5 wt% mica was higher than that of pure nylon 6 by 19.48% and 17.65%, respectively. The reduction in the impact strength was 24.7%. The composites" surface morphology was investigated using a scanning electron microscope.
본문·목차
인공지능 문자 인식 모델을 통해 추출된 텍스트로, 일부 오타나 오류가 포함될 수 있으나 지속적으로 개선 중입니다.
오류를 발견하셨다면 해당 부분을 드래그한 후 ' 를 통해 신고해주세요.
오류를 발견하셨다면 해당 부분을 드래그한 후 ' 를 통해 신고해주세요.
최근 본 자료 전체보기
