일정한 벽면열유속을 갖는 거친 이중동심관내의 난류유동과 열전달에 대한 연구 ( A Study on Turbulent Flow and Heat Transfer in the Roughened Concentric Annuli with Uniform Wall Heat Flux )

안수환 ,  김경천

대한기계학회 춘추학술대회

1995 .01

벽면거칠기위치에 따른 이중동심관내의 난류유동과 열전달 ( Turbulent Flow and Heat Transfer in Concentric Annuli Depending on Position of Wall Roughness )

안수환 ,  손유식

Journal of Advanced Marine Engineering and Technology (JAMET)

1997 .05

사각형 거칠기가 있는 동심이중관 내의 완전히 발달된 난류유동과 열전달 ( Fully Developed Turbulent Flow and Heat Transfer in Concentric Annuli with Square-Ribbed Roughness )

안수환 ,  오세경

Journal of Advanced Marine Engineering and Technology (JAMET)

1994 .02

일정 벽면열유속의 가열조건을 갖는 거친 동심환형관내의 난류열전달 ( Turbulent Heat Transfer in Rough Concentric Annuli With Heating Condition of Constant Wall Heat Flux )

안수환 ,  손유식

Journal of Advanced Marine Engineering and Technology (JAMET)

1999 .01

사각돌출형 거칠기가 있는 동심이중관 내의 완전히 발달된 난류유동과 열전달 ( Fully Developed Turbulent Flow and Heat Transfer in Concentric Annuli with Square-Ribbed Roughness )

안수환 ,  김경천 ,  이윤표

대한기계학회 춘추학술대회

1993 .01

표면거칠기가 있는 이중관내 완전히 발달된 난류유동과 열전달 ( Fully Developed Turbulent Flow and Heat Transfer in Concentric Annuli with Surface Roughness )

안수환 ,  김형진

Journal of Advanced Marine Engineering and Technology (JAMET)

1993 .02

사각형 거칠기가 있는 동심 이중관내의 완전히 발달된 난류유동과 열전달 ( Fuly Developed Turbulent Flow and Heat Transfer in Concentric Annuli with Square - Ribbed Roughness )

안수환 ,  김경천 ,  이윤표

대한기계학회 논문집

1994 .04

양벽면에 거칠기가 있는 이중동심관내의 난류유동에 관한 연구 ( A Study on the Turbulent Flow in Concentric Annuli with both Rough Walls )

안수환 ,  정양범

Journal of Advanced Marine Engineering and Technology (JAMET)

1994 .08

Laminar Fluid Flow and Heat Transfer in Concentric Annuli with Moving Cores

T. Shigechi ,  Y. Lee

KSME/JSME THERMAL and FLUID Engineering Conference

1990 .07

내관의 온도가 불균일한 동심환상공감에서의 자연대류 ( Natural Convection in Concentric Annuli with the Nonuniform Temperature Distribution of the Inner Cylinder )

김찬원 ,  권순석

대한기계학회 논문집

1989 .09

Fully Developed Turbulent Flow and Heat Transfer in Concentric Annuli with Square-Ribbed Roughness

S. W. Ahn ,  K. C. Kim ,  Y. P. Lee

KSME/JSME THERMAL and FLUID Engineering Conference

1994 .07

Prediction of Turbulent Heat Transfer in Concentric Annuli with Outer Rough Surfaces

Soo Whan Ahn

한국동력기계공학회 학술대회 논문집

2000 .05

사각돌출형거칠기구조의 내관을 가진 동심환형관의 유동에 대한 마찰계수 ( Friction Factors for Flow in Concentric Annuli With Core Rib-Roughened )

안수환

대한기계학회 춘추학술대회

1998 .01

INVESTIGATION OF TURBULENT FLOW AND HEAT TRANSFER IN ROUGH ANNULI

Soo Whan Ahn ,  Kyung Chun Kim

KSME/JSME THERMAL and FLUID Engineering Conference

1996 .10

Effect of Transverse Convex Surface Curvature on Turbulent Heat Transfer in Concentric Annuli

Man Woong Kim ,  Yung Lee

Heat Transfer Conference

1998 .08

사각돌출형 표면거칠기가 있는 이중동심원관내의 난류유동과 열전달 ( Turbulent Fluid and Heat Transfer in Concentric Annuli with Square - Ribbed Surface Roughness )

안수환 ,  이윤표 ,  김경천

대한기계학회 논문집

1993 .05

Enhanced Turbulent Heat Transfer Induced by Square-Ribbed Wall Roughness in Concentric Annuli

Y. Lee ,  Y. P. Lee ,  S. W. Ahn

KSME/JSME THERMAL and FLUID Engineering Conference

1990 .07

Fully Developed Turbulent Flow in Roughened Concentric Annuli : Experiment and Analysis

S. W. Ahn

동력시스템공학회지

2000 .05

Effect of Roughness Position on the Characteristics of Turbulence in Concentric Annuli

S. W. Ahn ,  W. J. Lee

동력시스템공학회지

1997 .12

이중관의 내의 사각돌출형 표면거칠기에 의한 난류 유동과 열전달 ( Turbulent Fluid Flow and Heat Transfer in Annuli with Square-Ribbed Surface Roughness )

안수환 ,  이윤표 ,  김경천

대한기계학회 춘추학술대회

1992 .01