메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Half-P.C. slab system is one of the composite structural systems which utilize precast concrete for lower protion and cast in situ concrete for upper portion slab. To resist the horizontal shear strength happened at the interface between topping and P.C. concrete slab, a cratch method has been tried. The purpose of this paper is representing economical index for design and manufacturing of the Half-P.C.. To determine ultimate interface shear strength, shear stress, coefficient, high and normal strength concrete are used for topping concrete. Major variables are compressive strength of topping concrete with or without shear tie, scratching roughness of the P.C. surface and tie or untie of the stud with Welded Wire Fabric in the P.C. member. The cross sectional area on joints is 3,200 cm2 in all specimens. Test results showed that horizontal shear strength could be guaranteed by just scratching without shear tie. In addition, it was found shear coefficient determinent equation was sufficient for shear design. Shear coefficient determinent equation is 0.00246+0.00599R - 0.0008R2.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-540-012931280