메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
한국자동차공학회 한국자동차공학회 춘 추계 학술대회 논문집 한국자동차공학회 2003년 춘계학술대회논문집 2호
발행연도
2003.5
수록면
751 - 756 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In order to investigate Bullet-proof characteristics of surface hardened Ti/Al alloy laminate structure under high velocity impact, a ballistic testing was conducted. Ballistic resistance of these materials was measured by protection ballistic limit(V_50), a statistic velocity with 50% probability penetration. Fracture behaviors and ballistic tolerance, described by penetratio modes, were respectfully observed, by V_50 test and Projectile Through Plates(PTP) test at velocities greater than V_50. PTP tests were conducted with 0˚obliquity at room temperature using 5.56㎜ ball projectile. V_50 tests with 0˚obliquity were also done with projectiles that were able to achieve near or complete penetration during PTP tests. Resistance to penetration, and penetration modes which face material was Titanium alloy, were compared to those which face material was anodized Aluminum alloy after cold-rolling.

목차

ABSTRACT

1.서론

2.배경 이론

3.실험

4.실험결과 및 고찰

5.결론

후기

참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-556-014022899