메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (3)

초록· 키워드

오류제보하기
The purpose of this study is to evaluation the fuel evaporntion by the injection of the fuel to the high tempernture surface heated of PTC Heater for early fuel evaporntion at the cold start stage in gasoline engine. In order to do this, we checked electrical control injection system and then made the experimental equipment so that tested the performance of PTC Heater. The injection angle for MPIS was 24˚and the avernge droplet diameter was 300㎛. The heater will be installed 70mm below the injector, so that the area of the heated zone should be wider than that of a circle with 30mm diameter. During the heating experiments of the injected fuel, the best condition for efficient evaporntion was drawn, that is, Curie temperature of 180˚C and the impinging angle of 90˚.

목차

ABSTRACT

1. 서론

2. 실험장치 및 방법

3. 실험결과 및 고찰

4. 결론

후기

참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-556-014027576