지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2002.11
- 수록면
- 2,415 - 2,420 (6page)
이용수
초록· 키워드
오류제보하기
In the present study, a new anchor design was proposed to minimize the initial deflection of micro multi-layer cantilever beam with step-up structure, which is a key component of thin film micro-mirror array. It is important to minimize the initial deflection. caused by residual stress. because it reduces the performance of the actuation. Theoretical and experimental studies were conducted to examine the cause of the initial bending deflection. It was found that the bending deflection at the anchor of the cantilever beam was the primary source of initial deflection. Various anchor designs were proposed and the initial deflections for each design were calculated by finite clement analysis. The analysis results were compared with experiments. To reduce the initial deflection a secondary support was added to the conventional structure. The optimal shapes were obtained by simulation and experiment. It was found from the analysis that the ratio of horizontal and vertical dimensions of secondary support was the governing factor, which affected the initial deflection.
목차
Abstract
1.서론
2.모델링
3.실험
4.결론
후기
참고문헌
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
초기변형을 갖고 있는 회전축의 동특성에 관한 실험적 연구
한국자동차공학회논문집
1999 .03
-
초기변형을 갖고 있는 회전축의 동특성에 관한 실험적 연구
한국자동차공학회 춘 추계 학술대회 논문집
1997 .11
-
부하 종류에 따른 Deflection Amp의 특성 고찰
한국정밀공학회 학술발표대회 논문집
2011 .06
-
Effects of Initial Condition of Steel Plate on Welding Deformation and Residual Stress due to Welding
Journal of Mechanical Science and Technology
2007 .03
-
철근콘크리트 보 처짐의 변동성 분석
대한건축학회 논문집 - 구조계
2004 .04
-
A numerical analysis of the large deflection of an elastoplastic cantilever
Structural engineering and mechanics : An international journal
1995 .01
-
Dynamic Deflection of a Railway Sleeper by Pragmatic Deflection Measurement Technique and Computer Vision Technique
대한토목학회 학술대회
2017 .10
-
등분포하중을 받는 플래트 슬래브 처짐에 관한 연구 ( A Study on the Deflection of Flat Slab with Uniformly Distributed Load )
대한건축학회 학술발표대회 논문집 - 구조계
1985 .04
-
헬릭스각의 변화에 따른 밀링공구의 변위 특성 연구
대한기계학회 논문집 A권
2004 .06
-
Evaluation of Surface Deflection in Automobile Exterior Panel by Curvature Based Method
기타자료
2011 .08
-
Long-term deflection of high-strength fiber reinforced concrete beams
Structural engineering and mechanics : An international journal
1999 .01
-
Deflection-Limiting Commands with 1st-Order Actuators
제어로봇시스템학회 국제학술대회 논문집
2013 .10
-
Simulations of short- and long-term deflections of flat plates considering effects of construction sequences
Structural engineering and mechanics : An international journal
2017 .01
-
Slope variation effect on large deflection of compliant beam using analytical approach
Structural engineering and mechanics : An international journal
2012 .01
-
적외선 이미지 센서의 Micro Cantilever변형
한국정밀공학회 학술발표대회 논문집
2006 .10
-
미소 변형 및 회전 단위 벡터를 이용한 판의 대변형 해석
Journal of the Korean Society for Precision Engineering
2000 .02
-
다중물리 시스템을 고려한 판재 제조공정의 변형 방지 조건 정립 연구
대한기계학회 춘추학술대회
2013 .12
-
공진문제 해결을 위한 Operating Deflection Shape과 모달해석
Journal of Advanced Marine Engineering and Technology (JAMET)
2006 .03
-
유한요소법을 이용한 마이크로 평엔드밀링에서의 공구변형 예측
한국생산제조학회지
2010 .08
-
Application of the Boundary Element Method to Finite Deflection of Elastic Bending Plates
International Journal of Safety
2003 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2009-550-014026771