메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
한국대기환경학회 한국대기환경학회지(국문) 한국대기환경학회지 제20권 제4호
발행연도
2004.8
수록면
451 - 463 (13page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The performance of disk-type catalytic fillers impregnated by TiO₂ or TiO₂-3Al₂O₃ㆍ2SiO₂ supports and V₂O_5, catalyst was evaluated for selective catalytic reduction (SCR) of NO with ammonia as a reductant. XRD, FT-IR, BET and SEM were used to characterize the catalytic filters prepared in this work. Optimal V₂O_5 loading and reaction temperature for V₂O_5/TiO₂ catalytic filters were 3~6wt.% and 350~400℃ at GHSV 14.300hr-¹ in the presence of oxygen, respectively. With increasing the V₂O_5 loading from 0.5 to 6 wt.%, NO conversion increased from 24 to 96% at 400℃ and 14.300 hr-¹, and maintained at 80% over in the V₂O_5 loading range of 3~6 wt.% and then dropped at V₂O_5 loading of 7wt.% over. In comparing V₂O_5/TiO₂ and V₂O_5/TiO₂-3Al₂O₃ㆍ2SiO₂ catalytic fillers, which have same 3 wt.% V₂O_5 loading, the V₂O_5/TiO₂-3Al₂O₃ㆍ2SiO₂ catalytic filter showed higher activity than V₂O_5/TiO₂ catalytic filter, but higher differential pressure drops owing to its low air permeability.

목차

Abstract

1. 서론

2. V₂O_5 촉매필터 제조와 실험방법

3. 결과 및 고찰

4. 결론

감사의 글

참고문헌

참고문헌 (18)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-539-014260807