메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
대한건축학회 대한건축학회 논문집 - 구조계 대한건축학회논문집 - 구조계 제20권 제6호
발행연도
2004.6
수록면
99 - 106 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this paper, applicability of high early strength type AE water reducing admixture(HAEWA), which is developed by the authors to reduce the capable time for form stripping is discussed. Engineering properties of concrete incorporating HAEWA is investigated. According to results, use of HAEA resulted in a slight reduction of slump loss compared with that of existing AE water reducing admixture(AEWA). For setting time, use of HAEWA exhibited a acceleration in setting time compared with that of AEWA. For influence of HAEWA on the replacement method of mineral admixture, replacement for fine aggregates shows the fastest setting time and in order for both replacement method of mineral admixture, replacement for fine aggresates shows the fastest setting time and in order for both replacement of cement and fine aggresates and replacement for cement. Bleeding was observed to occur at early stage with HAEWA. At 20℃ required time to gain 5MPa of compressive strength. which is capable of side form stripping. is achieved at near 19 hours when AEWA is used, while use of HAEWA before 16 hours. At 10℃, use of HAEWA accelerates the capable time for form stripping compared with that of AEWA. Desirable applicability for P type Schmidt hammer was achieved because rebound number by P type Schmidt hammer had good agreement with actual actual compressive strength.

목차

Abstract

1. 서론

2. 실험계획 및 방법

3. 실험결과 및 분석

4. 결론

참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-540-014285685