메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
한국자기학회 Journal of Magnetics Journal of Magnetics Vol.3 No.2
발행연도
1998.6
수록면
44 - 48 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Scanning Electron Microscopy with Polarization Analysis (SEMPA) was used to image the surface magnetic domain structure of the 100 ㎛ thick 3% Si-Fe sheet. The thin-gauged 3% Si-Fe strips with magnetic induction (B_(10)) from 1.98 to 1.57 Tesla were prepared via conventional metallurgical processes including melting, hot- and cold-rolling, intermediate annealing and final annealing. Using SEMPA, it was observed that the B_(10) (1.98 T) Tesla sample was almost composed of 180° stripe domains which are parallel to rolling direction. On the other hand the 3% Si-Fe sheet with B_(10) (1.57 T) Tesla was composed of large 180° stripe domains that are slanted about 30° to the rolling direction and complex magnetic domain structures like tree and zigzag pattern. The 180° stripe domains, which covered a major part of the sample, had (110)<001> Goss texture parallel to the rolling direction. The domain walls between 180° stripe domains were the conventional Bloch type walls. On the other hand, the 90° domains, which covered minor part on edge of the sample, were observed in (200) grains. The domain walls between 90° domains were the Neel type walls. In high magnification, the elliptical singularity at the Neel walls was clearly observed.

목차

Abstract

1. Introduction

2. Experimental Procedures

3. Results and Discussion

4. Conclusions

Acknowledgment

References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-428-015127654