메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 1996年度 동계학술발표 논문집
발행연도
1996.11
수록면
111 - 115 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
Flow boiling heat transfer coefficients(HTCs) of R12, R134a, R22, R407C and R410A were measured and compared. The horizontal test section is composed of smooth copper tubes for refrigerants, surrounding annulus for water flow, and temperature and pressure measurement sensors. The test tube is 6m long, which is divided into 6 equal parts for measurements, with inner and outer diameters of 8.82㎜ and 9.52㎜ respectively. The fluid heating method was used. The results of the experiments with R12 and R134a showed the possibility of substituting R134a for R12. The HTCs of R407C were 10~30% lower than those of R22. The HTCs of R410A were above 30% higher than those of R22 in the low quality range, but in the quality range above 0.5, the HTCs of R410A were nearly the same as those of R22.

목차

ABSTRACT

1. 서론

2. 실험장치 및 방법

3. 결과 및 고찰

4. 결론

후기

5. 참고 문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-553-015389452