메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The present study was to investigate problems related to cooling of a micro processor in a notebook PC by using miniature heat pipe. For 12 miniature heat pipes with 3 different wick structure, respectively, a performance test was conducted to measure wall temperature distributions and thermal resistance. For most of the tested heat pipes, the heat transport capability was high enough to transfer a heat up to 12W. A value of thermal resistance rested in the range of 0.2~0.8℃/W. But in 2~3 cases, a temperature rise at the evaporator end was observed, indicating a partial dryout at heat loads over 9W. But the measured values of vapor temperature were unexpectedly high, ranging from 60 to 120℃. This phenomenon seemed to be caused by a poor contact structure at the level of condenser wall that is in contact with a cooling plate of steel, resulting a relatively high contact resistance of 3~l0℃ ㎡/W.

목차

ABSTRACT

1. 서론

2. 열전달 해석

3. 히트파이프 성능시험

4. 결론

참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-553-015411853