메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 2002년도 하계학술발표회 논문집(Ⅱ)
발행연도
2002.6
수록면
205 - 210 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
As a natural ventilation strategy, general gravity ventilators can be installed on the roof of an industrial building. Unfortunately, the appropriate design data for this type of ventilator could not be found except for the design data in commercial catalogues in which there is no scientific reference. In this study, the ventilation rates of gravity ventilator were thus evaluated for the several design parameters, i.e. 1) wind direction, 2) wind speed, 3) temperature differences between the exterior and interior of a building and 4) ventilator height and width. A commercially available CFD (Computational Fluid Dynamics) package was used to estimate the ventilation rates numerically. The ventilation performance were enhanced as 1) the wind direction is close to the perpendicular direction of industrial building, 2) wind speed increases, 3) the temperature difference between the exterior and interior of a building increases, and 4) the width of ventilator neck enlarges. In addition, the temperature difference is the dominant factor in the lower wind speed (0~2.5㎧) while the wind speed act as significant factor in the higher wind speed (2.5~10㎧). The flow rate of low height ventilator is dramatically reduced than standard height. But efficiency of tall ventilator aimed for increasing flow rate was insignificant.

목차

ABSTRACT

1. 서론

2. 벤틸레이터 규격 산정

3. 수치해석

4. 결과 및 고찰

5. 결론

참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-553-015420258