메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
대한건축학회 대한건축학회 논문집 - 구조계 대한건축학회논문집 - 구조계 제22권 제4호
발행연도
2006.4
수록면
95 - 102 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (11)

초록· 키워드

오류제보하기
The effective utilization of wood structure is urged from the point of preservation of the natural resources and global environment. Also, the long span and large-scale timber structures are requested to promote the wood demand. There are few cases where wooden structure is used for the medium rise building in europe. It is necessary to develop and verify a new structural system to achieve a medium rise building using wooden structure. This study deals with high-performance timber-based composite members, which consist of laminated timber and H-beam. Therefore, it experimented by bending test of the joints using simple H-section steel and structural laminated timber to investigate the strength, deformation capacities, stress distributions of laminated timber and failure patterns. The main parameters are stiffening methods(non-stiffening, bolt, lag screw, and epoxy) between H-beam and structural laminated timber. The results of the test show that non-stiffening specimen having inserting length of 2 times of the H-beam height was characterized by fairly good strength, stiffness and sufficient energy absolution capacities. However, specimens with metal equipments (bolts and lag screws) are abruptly failures after maximum load by affecting of the loss of section.

목차

Abstract
1. 연구배경 및 목적
2. H형강과 구조용집성재를 이용한 접합방식
3. 실험결과
4. 실험분석 및 고찰
5. 결론
감사의 글
참고문헌

참고문헌 (1)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-540-015485252