지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술대회자료
- 저자정보
- 발행연도
- 2006.6
- 수록면
- 91 - 98 (8page)
이용수
초록· 키워드
오류제보하기
The purpose of this study is to investigate the opacity and printing strength of MG paper overlaid plywood. The printing strength of ink on MG paper can be evaluated effectively by a formula E<SUP>*2</SUP> = [(L<SUP>*</SUP>)<SUP>2</SUP> + (a<SUP>*</SUP>)<SUP>2</SUP> + (b<SUP>*</SUP>)<SUP>2</SUP>]<SUP>1/2</SUP> that we proposed. Higher E value indicates good printing strength of ink-on-paper. We also assess the real color of translucent printed MG paper with a formula CIE △E<SUP>*</SUP> (color difference between a pile of same paper to be opaque and fancy paper laminated board). In addition, the color difference on paper surface caused by the color of wood-based board (bottom) can be evaluated by a formula of Pc. No. Generally, an acceptable appearance quality of fancy boards is △E<SUP>*</SUP> ＜ 2.0 and small Pc.No. value.
The experimental results showed that Japan-made MG papers ?J1, J2 and J3 have better printing strength and gloss than that of Taiwan-made paper (T1). The reason for this was that Taiwan-made paper has poor printing strength and low gloss, which might be correlated to the fiber compositions in paper. Higher printing strength can be seen for short fiber containing handsheets when comparing to that of handsheets. Nonetheless, low-freeness sheets gives better printing strength than that of high-freeness sheets. High-opacity MG paper gives good opacifying effect to the fancy paper laminated wood-based boards. Comparing the surface color of 2 kinds of fancy paper laminated boards, paperboard T1 laminated with high-opacity fancy paper showed slight color difference. The same results can be seen for ?? g/㎡ handsheets. Higher-opacity Acacia and Eucalyptus bleached sulfate pulps (short fiber) gives higher opacifying effect on the plywood when comparing to Northan pine and Radiata pine sulfate pulps(long fiber). The former ones also showed small color differences when comparing the color differences between the color of fancy paper and laminated paper board. Additionally, the color of bottom plywood can’t be shown through for the highopacify surface paper adhered to. Besides, the PC No of the base paper laminated board is small as well. Apparently, we can add colorants to the binders for the manufacture of various handsheets (30 g/㎡) with various pulp mix ratios to increase the opacity of paperboards to certain extents. When we using yellow and brown binders in paper laminated board, the color difference between Acacia and Eucalyptus handsheets overlaid boards decreasing to 2.0 (acceptable △E<SUP>*</SUP>＜ 2.0, hard to discern), but not much improvement for Northern and Radiata pines. Definitely, show-through defects can be discernible for lower opacity papers. In general, admirable printing strength of fancy paper by which glued to plywood can be made with high-opacity paper and colored binders techniques.
The experimental results showed that Japan-made MG papers ?J1, J2 and J3 have better printing strength and gloss than that of Taiwan-made paper (T1). The reason for this was that Taiwan-made paper has poor printing strength and low gloss, which might be correlated to the fiber compositions in paper. Higher printing strength can be seen for short fiber containing handsheets when comparing to that of handsheets. Nonetheless, low-freeness sheets gives better printing strength than that of high-freeness sheets. High-opacity MG paper gives good opacifying effect to the fancy paper laminated wood-based boards. Comparing the surface color of 2 kinds of fancy paper laminated boards, paperboard T1 laminated with high-opacity fancy paper showed slight color difference. The same results can be seen for ?? g/㎡ handsheets. Higher-opacity Acacia and Eucalyptus bleached sulfate pulps (short fiber) gives higher opacifying effect on the plywood when comparing to Northan pine and Radiata pine sulfate pulps(long fiber). The former ones also showed small color differences when comparing the color differences between the color of fancy paper and laminated paper board. Additionally, the color of bottom plywood can’t be shown through for the highopacify surface paper adhered to. Besides, the PC No of the base paper laminated board is small as well. Apparently, we can add colorants to the binders for the manufacture of various handsheets (30 g/㎡) with various pulp mix ratios to increase the opacity of paperboards to certain extents. When we using yellow and brown binders in paper laminated board, the color difference between Acacia and Eucalyptus handsheets overlaid boards decreasing to 2.0 (acceptable △E<SUP>*</SUP>＜ 2.0, hard to discern), but not much improvement for Northern and Radiata pines. Definitely, show-through defects can be discernible for lower opacity papers. In general, admirable printing strength of fancy paper by which glued to plywood can be made with high-opacity paper and colored binders techniques.
목차
ABSTRACT
INTRODUCTION
EXPERIMENTAL
RESULTS AND DISCUSSION
CONCLUSIONS
REFERENCE
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
낙엽분말(落葉粉末)을 이용(利用)한 합판용(合板用) 접착제(接着劑)의 증량(增量)에 관(關)한 연구(硏究)
한국산림과학회지
1979 .01
-
인쇄용지의 불투명도 향상을 위한 지료조성 ( Stock Preparations for the Opacity Improvement of Printing Paper )
펄프·종이기술
2000 .03
-
합판(合板)의 방부처리(防腐處理)가 그 접착강도(接着强度) 및 방부력(防腐力)에 미치는 영향(影響)
한국산림과학회지
1974 .01
-
Development of the Plywood Demand Prediction Model
한국산림과학회지
2008 .01
-
3D Printing of Food
한국식품영양과학회 학술대회발표집
2019 .10
-
한지의 인쇄적성 향상
펄프·종이기술
2005 .12
-
안료 배합에 의한 백판지의 불투명도 향상
한국펄프·종이공학회 학술발표논문집
2013 .10
-
Studies on Improvement Printed Mottle for High Quality Printing
한국펄프종이학회 기타 간행물
2006 .06
-
합판용(合板用) 고온경화형(高？硬化型) 수용성(水溶性) 요소(尿素)·페놀공축합수지(共縮合樹脂)의 성질(性質)과 그 접착강도(接着？度)
한국산림과학회지
1983 .01
-
잉크 분산 및 인쇄조건이 인쇄 모틀에 미치는 영향
한국펄프·종이공학회 학술발표논문집
2006 .04
-
친환경 원가 절감형 바이오바인더를 이용한 다층 도공지 제조(제2보) : Top-coating층에 대한 적용
펄프·종이기술
2015 .02
-
Printing and Paper Industry in Digital Era
펄프·종이기술
2000 .12
-
The Opacity and Physical Property of Paper Influenced by Using Mixed Fillers
한국펄프·종이공학회 학술발표논문집
2018 .04
-
목판본과 금속활자본의 식별을 위한 기초연구
한국펄프·종이공학회 학술발표논문집
2015 .04
-
적자색 겹꽃 화형의 조경용 화단국화 ‘Fancy Ball’ 육성
한국원예학회 학술발표요지
2010 .05
-
펄프 조성 및 무기 충전제가 담배 연포장지 물성에 미치는 영향
한국연초학회지
2010 .01
-
합판폐재를 원료로 한 펄프 제조에 관한 연구 ( Studies on Pulping Characteristics of Plywood Wastes )
펄프·종이기술
1978 .06
-
디지털 인쇄용지의 표면 거칠음도에 따른 인쇄품질에 관한 연구
펄프·종이기술
2016 .08
-
옥촉서간(玉蜀黍幹), 송수피(松樹皮), 소맥(小麥), 리기다송엽(松葉), 잣나무엽(葉) 및 목분말(木粉末)을 이용(利用)한 합판(合板)의 접착증량(接着增量)에 관(關)한 연구(硏究)
한국산림과학회지
1981 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2009-586-015648942