메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
한국마린엔지니어링학회 Journal of Advanced Marine Engineering and Technology (JAMET) 한국마린엔지니어링학회지 제31권 제6호
발행연도
2007.9
수록면
699 - 706 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The cooling heat transfer coefficient and pressure drop of CO₂ (R-744) in helical coil copper tubes were investigated experimentally. The main components of the refrigerant loop are a receiver, a variable-speed pump, a mass flow meter, a pre-heater and a inclined helical coil type gas cooler (test section). The test section consists of a smooth copper tube of 2.45 and 4.55 mm inner diameter. The refrigerant mass fluxes were varied from 200 to 600 [㎏/㎡s] and the inlet pressures of gas cooler were 7.5 to 10.0 [㎫]. The heat transfer coefficients of CO₂ in helical coil tubes increase with the increase of mass flux and gas cooling pressure of CO₂. The pressure drop of CO₂ in the gas cooler shows a relatively good agreement with those predicted by Ito’s correlation developed for single-phase in helical coil tubes. Though a few correlation available with the data, the local heat transfer coefficient of CO₂ agrees well with those presented by Pitla et al. among the predictions. However, at the region near pseudo-critical temperature, the experiment data indicate higher values than the Pitla et al. correlation.

목차

Abstract
1. 서론
2. 실험장치 및 방법
3. 냉각 열전달과 압력강하 특성
4. 결론
후기
참고문헌
저자소개

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-559-015937518