메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 창립 60주년 기념 춘계학술대회 강연 및 논문 초록집
발행연도
2005.5
수록면
2,519 - 2,524 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (6)

초록· 키워드

오류제보하기
The evaporation pressure drop of CO₂ (R-744) in a horizontal tube was investigated experimentally. The experiments were conducted without oil in a closed refrigerant loop which was driven by a magnetic gear pump. The main components of the refrigerant loop are a receiver, a variable-speed pump, a mass flow meter, a pre-heater and evaporator (test section). The test section consists of a smooth, horizontal stainless steel tube of 7.75 ㎜ inner diameter. The experiments were conducted at mass flux of 200 to 500 ㎏/㎡s, saturation temperature of -5℃ to 5℃, and heat flux of 10 to 40 ㎾/㎡. The test results showed the evaporation pressure drop of CO₂ are highly dependent on the vapor quality, heat flux and saturation temperature. The evaporation pressure drop of CO₂ is very lower than that of R-22. In comparison with test results and existing correlations, the best fit of the present experimental data is obtained with the correlation of Choi et al. But existing correlations failed to predict the evaporation pressure drop of CO₂. Therefore, it is necessary to develop reliable and accurate predictions determining the evaporation pressure drop of CO₂ in a horizontal tube.

목차

Abstract
1. 서론
2. 실험장치 및 방법
3. 결과 및 고찰
4. 결론
후기
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-550-016055885