메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
전력전자학회 ICPE(ISPE)논문집 2007년 ICPE논문집
발행연도
2007.10
수록면
252 - 256 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
The power supply system which requires the low-voltage / high-current output has been changing from conventional centralized power system to distributed power system. The distributed power system consists of bus converter and POL. The most important factor is the system stability in bus architecture design. The overlap between the output impedance of bus converter and input impedance of POL causes system instability, and it has been an actual problem. Increasing the bus capacitor, system stability can be reduced easily. However, due to the limited space on the system board, increasing of bus capacitors is impractical. The urgent solution of the issue is desired strongly. This paper presents the output impedance design for on-board distributed power system by means of three control schemes of bus converter. The output impedance peak of the bus converter and the input impedance of the POL are analyzed, and it is conformed by experimentally for stability criterion. Furthermore, the design process of each control schemes for system stability is proposed.

목차

Abstract
Ⅰ. INTRODUCTION
Ⅱ. STABILITY CRITERION AND IMPEDANCE CHARACTERISTICS
Ⅲ. DESIGN CONSIDERATION
Ⅳ. CONCLUSIONS
REFERENCES

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-560-016305997