메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
한국동력기계공학회 한국동력기계공학회 학술대회 논문집 2005年度 春季學術大會 論文集
발행연도
2005.6
수록면
55 - 63 (9page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
The effect of grain size on the damping capacity and strength of Fe-26Mn-2Al alloy studied in this paper has been investigated after changing the microstructure by cold rolling and changing grain size. The results obtained from this study as follows : Micro structures in Fe-26Mn-2Al at room temperature consist of a large quantity of austenite and a small quantity of ε and α' martensite. And ε and α' martensite was increased by increasing the degree of cold rolling. Damping capacity was linearly increased with increasing ε martensite content, which suggests that stacking faults and ε martensite variant boundaries are the principle damping sources. In case of tensile strength, it influenced on both ε and α' martensite. With increasing the grain size in Fe-26Mn-2Al alloy, strength and elongation was decreased while damping capacity was increased due to increasing the volume fraction of ε martensite by decrement in stability of austenite phase. While tensile strength was linearly increased with increasing the degree of rolling due to transforming austenite to martensite by working, elongation was dramatically decreased at early stage but slowly decreased with increasing the degree of cold rolling.

목차

Abstract
1. 서론
2. 실험방법
3. 실험결과 및 고찰
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-550-014948929