메뉴 건너뛰기
소속 기관 / 학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
고객센터 ENG
주제분류

a-C:H Films Deposited in the Plasma of Surface Spark Discharge at Atmospheric pressure : Part Ⅰ: Experimental Investigation

오류 신고하기

피인용 0

a-C:H Films Deposited in the Plasma of Surface Spark Discharge at Atmospheric pressure : Part Ⅰ: Experimental Investigation
검색

    초록·키워드

    The aim of this work is the synthesis of a-C:H films from methane gas using surface spark discharge at the atmospheric pressure. Properties of these films have been investigated as functions of energy W delivered per a methane molecule in the discharge. The method enables the coatings to be deposited with high growth rates (up to 100 μm/hour) onto large-area substrates. It is shown that the films consist of spherical granules with diameter of 20~50 nm formed in the spark channel and then deposited onto the substrate. The best film characteristics such as minimum hydrogen-to-carbon atoms ratio H/C=0.69, maximum hardness Hv=3 GPa, the most dense packing of the granules and highest scratch resistance has been obtained under the condition of highest energy W of 40 eV. The deposited a-C:H coatings were found to be more soft and hydrogenated compared to the diamond-like hydrogenated (a-C:H) films which obtained by traditional plasma-enhanced chemical vapor deposition methods at low pressure (<10 Torr). Nevertheless, these coatings can be potentially used for scratch protection of soft plastic materials since they are of an order harder than plastics but still transparent (the absorption coefficient is about 10^4~10^5 m^-1). At the same time the proposed method for fast deposition of a-C:H films makes this process less expensive compared to the conventional techniques. This advantage can widen the application field of these films substantially.

    최근 본 자료 전체보기

      UCI(KEPA) : I410-ECN-0101-2009-581-015061435