지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- Korean Society for Precision Engineering International Journal of Precision Engineering and Manufacturing International Journal of Precision Engineering and Manufacturing Vol.10 No.2
- 발행연도
- 2009.4
- 수록면
- 73 - 78 (6page)
이용수
초록· 키워드
오류제보하기
In this paper, we investigated the deflection coefficients of rectangular plates that are reinforced in the middle. For reinforced plates with three different aspect ratios and two types of boundary conditions (simply supported and clamped), we derived the deflection coefficients with respect to the elastic modulus ratio and the relative length of the inner plate using the least-squares method. We performed a finite element analysis of the models, and calculated the deflection coefficients of reinforced plates in terms of the deflection coefficients of simple (nonreinforced) plates. The results can be extended to various types of reinforced rectangular plates.
목차
1. Introduction
2. Bending Theory for a Rectangular Plate
3. Finite element analysis
4. Results and Discussion
5. Conclusions
ACKNOWLEDGEMENT
REFERENCES
참고문헌 (12)
참고문헌 신청
1. [단행본] - Timoshenko, S. P / 1959 / Theory of Plates and Shells / McGraw-Hill Co. : 180 ~ 228
2. [학술지(정기간행물)] - Wook Dokko / 2005 / Analysis of Elasto-Plastic Dynamic Behavior of Plates Subjected to Low Velocity Impact / International Journal of Precision Engineering and Manufacturing 6 (1) : 36 ~ 41
3. [학술지(정기간행물)] - Bala Krishna Juluri / 2007 / Long Range and High Axial Load Capacity Nanopositioner using Single Piezoelectric Actuator and Translating Supports / International Journal of Precision Engineering and Manufacturing 8 (4) : 3 ~ 9
4. [학술지(정기간행물)] - Kee Joo Kim / 2008 / Hydroforming Simulation of High-strength Steel Cross-members in an Automotive Rear Subframe / International Journal of Precision Engineering and Manufacturing 9 (3) : 55 ~ 58
5. [학술지(정기간행물)] - Han, G. J / 2001 / The Effect of the Area Ratio and Change of Location on the Buckling Stress of Two Rectangular Plates Spot-welded / J. of KSPE 18 (12) : 54 ~ 59
2. [학술지(정기간행물)] - Wook Dokko / 2005 / Analysis of Elasto-Plastic Dynamic Behavior of Plates Subjected to Low Velocity Impact / International Journal of Precision Engineering and Manufacturing 6 (1) : 36 ~ 41
3. [학술지(정기간행물)] - Bala Krishna Juluri / 2007 / Long Range and High Axial Load Capacity Nanopositioner using Single Piezoelectric Actuator and Translating Supports / International Journal of Precision Engineering and Manufacturing 8 (4) : 3 ~ 9
4. [학술지(정기간행물)] - Kee Joo Kim / 2008 / Hydroforming Simulation of High-strength Steel Cross-members in an Automotive Rear Subframe / International Journal of Precision Engineering and Manufacturing 9 (3) : 55 ~ 58
5. [학술지(정기간행물)] - Han, G. J / 2001 / The Effect of the Area Ratio and Change of Location on the Buckling Stress of Two Rectangular Plates Spot-welded / J. of KSPE 18 (12) : 54 ~ 59
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Elastic bending analysis of irregular-shaped plates
Structural engineering and mechanics : An international journal
1999 .01
-
Application of the Boundary Element Method to Finite Deflection of Elastic Bending Plates
International Journal of Safety
2003 .01
-
Nonlinear vibration of Mindlin plate subjected to moving forces including the effect of weight of the plate
Structural engineering and mechanics : An international journal
1999 .01
-
판의 처짐에 관한 연구 ( A Study on the Deflection of Plates )
대한건축학회 학술발표대회 논문집 - 구조계
1983 .04
-
Simulations of short- and long-term deflections of flat plates considering effects of construction sequences
Structural engineering and mechanics : An international journal
2017 .01
-
A method for predicting approximate lateral deflections in thin glass plates
Structural engineering and mechanics : An international journal
2015 .01
-
철근 콘크리트 플랫 플레이트의 처짐 예측을 위한 유한요소해석
대한건축학회 학술발표대회 논문집 - 구조계
2011 .10
-
탄성보 이론을 적용한 원형평판의 지지단길이 변화에 따른 강성도 해석
Journal of the Korean Society for Precision Engineering
2004 .03
-
Bending of an isotropic non-classical thin rectangular plate
Structural engineering and mechanics : An international journal
2017 .01
-
Large deflection analysis of point supported super-elliptical plates
Structural engineering and mechanics : An international journal
2014 .01
-
콘크리트의 인장강성을 고려한 플랫 플레이트의 처짐 해석
대한건축학회 논문집 - 구조계
2011 .10
-
사각형 강체를 포함한 사각평판의 경계조건에 따른 처짐 연구
Journal of the Korean Society for Precision Engineering
2003 .03
-
사각형 강체를 포함한 사각평판의 경계조건에 따른 처짐 연구
한국정밀공학회 학술발표대회 논문집
2002 .05
-
Exact solution for transverse bending analysis of embedded laminated Mindlin plate
Structural engineering and mechanics : An international journal
2014 .01
-
Free Vibration Analysis of Plate Structures Using Finite Element-Transfer Stiffness Coefficient Method
Journal of Mechanical Science and Technology
2003 .06
-
민들린 이론에 따른 절판구조물 해석에 관한 연구 ( A Study on the Analysis of Folded Plate Structures using a Mindlin Formulation )
대한건축학회 논문집
1991 .04
-
대면적 알루미늄 후판의 수평 이송을 위한 캐리어 최적설계
소성·가공
2013 .11
-
The buckling of rectangular plates with opening using a polynomial method
Structural engineering and mechanics : An international journal
2005 .01
-
균등 압력이 부과된 원형판의 변형에 대한 해석요소의 정확성 비교
융ㆍ복합기술연구소 논문집
2016 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0