메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김도우 (한양대학교) 강훈 (한양대학교) 안종문 (안산1대학) 신성우
저널정보
대한건축학회 대한건축학회 논문집 - 구조계 大韓建築學會論文集 構造系 第25卷 第10號
발행연도
2009.10
수록면
51 - 58 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
This study was performed to evaluate on the ductile capacities and flexural behaviors of 150MPa Ultra High strength concrete(UHSC) beam reinforced by SD400 and SD500 bars to maximum tensile steel ratio. The reinforced ultra-high-strength-concrete beam subjected to flexural moment behaves more brittleness than the moderate strength concrete beam reinforced with equal reinforcement ratio(ρ/ρ<SUB>b</SUB>, ρ<SUB>b</SUB>=balanced steel ratio). In this study, 10 singly reinforced rectangular beam specimens used 150 ㎫ concrete compressive strength were tested to evaluate on flexural behavior. Test results are follows ; 1)The ductile capacity of RC beam with above 100㎫ Ultra High strength concrete (UHSC) and without compressive steel significantly decrease as increase concrete strength and displacement ductility factor of 150㎫ HSC indicates about 1.3~2.56. 2)when the concrete compressive strength with 150 ㎫, the maximum reinforcement ratio should be used less than 0.625ρ<SUB>b</SUB> for ductile behavior.

목차

Abstract
1. 서론
2. 실험개요
3. 휨거동 실험결과 및 분석
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-540-018989557