지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술대회자료
- 저자정보
- 발행연도
- 2009.11
- 수록면
- 2,930 - 2,933 (4page)
이용수
초록· 키워드
오류제보하기
In the past few years, a paradigm shift has taken place in the understanding of normal knee kinematics. Although the knee joint may look like a simple joint, it is one of the most complex. Moreover, the knee is more likely to be injured than is any other joint in the body. When the knee moves, it does not just bend and straighten, or, as it is medically termed, flex and extend. There is also a slight rotational component in this motion. It has been held that during knee flexion the femur bodily rolls-back on the tibia, and furthermore that his phenomenon is produced by tension in the cruciate ligaments. Previous studies on joint motion have relied on techniques with various standing and undertaking a squat the living knee can be image in three dimensions under weight-bearing conditions. In this study, We regard to Knee joint movement has simplificated ellipsography motion. So, Our design concept has ellipsography motion hinge applied reciprocator.
목차
Abstract
1. Introduction
2. Reciprocal Movement Kinematics of Tibio-Femoral Joint
3. Future Development Plan of Tibio-Femoral Joint Brace by Reciprocal Kinematics
Acknowledgement
References
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Design of the Knee Brace Hinge Reflecting the Knee Motion in Both Passive and Active Conditions
대한기계학회 춘추학술대회
2009 .11
-
Optimal Hinge Design of Knee Braces for the Treatment of Knee Osteoarthritis
한국정밀공학회 학술발표대회 논문집
2009 .06
-
한국인의 3차원 무릎관절 구축 및 형상 측정
대한기계학회 논문집 A권
2004 .11
-
슬관절 움직임을 고려한 무릎재활기기의 관절 메커니즘에 관한 연구
한국정밀공학회 학술발표대회 논문집
2015 .05
-
전십자 인대 재건을 위한 인체 슬관절의 굴신 운동 해석
대한기계학회 춘추학술대회
2003 .04
-
인공 무릎 관절의 3차원 운동 시뮬레이션
Journal of the Korean Society for Precision Engineering
2004 .09
-
Fabrication and Mechanical Fatigue Test of Knee Brace Using Carbon Fiber Reinforced Plastic according to the Laminate Configuration
대한기계학회 춘추학술대회
2009 .11
-
Development of Knee Joint Robot for Students Becoming Therapist : Design of Prototype and Fundamental Experiments
제어로봇시스템학회 국제학술대회 논문집
2010 .10
-
6 Degree-of-Freedom Mechanical Knee Joint for Imitating Anatomical Movement of a Human Knee Joint
대한기계학회 춘추학술대회
2009 .05
-
Extraction of Abnormalities in The Flexion and Extension of Knees
INTERNATIONAL CONFERENCE ON FUTURE INFORMATION & COMMUNICATION ENGINEERING
2017 .06
-
An Experimental Study on the Relationship between the Components and Movement of the Human Knee Using an Android Model : Measurement of Internal-External Rotation and Anterior-Posterior Tibial Translation
제어로봇시스템학회 국제학술대회 논문집
2015 .10
-
Development of Knee Brace Hinge for the Optimization of Rotation Center in Femoro-tibio Joint
한국정밀공학회 학술발표대회 논문집
2009 .10
-
보행 중 인체 슬관절의 3차원 접촉 모델 개발
Journal of the Korean Society for Precision Engineering
2005 .11
-
인공무릎관절 굴곡 시 근력 균형에 따른 반력 및 운동 특성 분석
한국정밀공학회 학술발표대회 논문집
2018 .05
-
인체의 슬관절 운동을 고려한 외골격 슬관절 시스템 연구
한국정밀공학회 학술발표대회 논문집
2011 .10
-
ACE-Knee, a Novel Modularized Knee Exoskeleton: Concept Design and Analysis of Design Requirements by Knee Motion Analysis
Journal of the Korean Society for Precision Engineering
2019 .04
-
슬관절 전치환술용 3차원 시술변수 추출 시스템
한국CDE학회 논문집
2011 .10
-
Comparison of Knee Joint Loads and Muscle Forces between OA Patients and Normal Subjects in Walking
대한기계학회 춘추학술대회
2013 .12
-
무릎 인공관절 설계를 위한 넙다리뼈 절단면 계측
한국정밀공학회 학술발표대회 논문집
2007 .06
-
Development of Mechanical Evaluation Jig for Analysis of Binding Characteristics between Revision Total Knee Prosthesis Parts by Knee Joint Kinematics
대한기계학회 춘추학술대회
2012 .03
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2009-550-019131657