메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김승훈 (한밭대학교) 이용택 (한밭대학교) 김태수 (한밭대학교) 채서호 (대전교육청)
저널정보
대한건축학회 대한건축학회 논문집 - 구조계 大韓建築學會論文集 構造系 第26卷 第5號
발행연도
2010.5
수록면
3 - 10 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Headed bars have been used to the anchoring of the tension or compression longitudinal bars and of the shear reinforcing bars. Recently, lap splices of headed steel reinforcements have been attempted to the joints of precast concrete members and to the connections between old and new concrete members. New moment-resisting precast concrete beam-column joint was proposed for moderate seismic regions. It has the connection headed reinforcing bars, penetrated the joint. The connection headed reinforcing bars and the bottom headed bars of precast beam are in noncontact lap splices with different effective depths.
In this research, a test program was conducted to evaluate the lap splice performance of the noncontact headed reinforcements with different effective depths. Five lap splice specimens were tested. Their variable was the lap length(6~14 times the diameter of D25 bar). Test results showed that the specimen, which had the lap length as fourteen times the diameter of reinforcement, had the nominal tensile strength of reinforcement. Specimens which had the lap length less than twelve times the diameter of reinforcement failed with the slip of reinforcements and the vertical crack in the lap zone. The ratios of the test maximum strength and the maximum strength by CCD method were 7.10∼13.37. It was caused by the reduction of lap length, where headed reinforcements were located less than 1.5 times lap length from three or more edges, and by consideration of only the bearing stress of heads except the bond stress of reinforcements. The ratios of the test maximum strength and the maximum strength assumed by ACI 318-08 for headed deformed bars were 1.70∼2.17. To develop a reliable design guideline of the lap strength of headed reinforcements, it needs to consider the effect of transerse reinforcement, material strengths, edge distance, and spacing of head bars.

목차

Abstract
1. 서론
2. 실험
3. 실험결과 및 분석
4. 겹침이음 성능평가
5. 결론
참고문헌

참고문헌 (1)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2010-540-002991817