메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
박정훈 (전북대학교) 백승세 (전북대학교) 김회현 (전북대학교) 박종진 (전북대학교) 양성모 (전북대학교) 유효선 (전북대학교)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2006년도 제1차 재료 및 파괴부문 학술대회 논문집
발행연도
2006.3
수록면
140 - 145 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
This Small Punch Creep Test is a Creep test method which uses comparatively smaller specimens than those required in conventional material creep tests. The size of the specimen is 10㎜×10㎜×0.5㎜. This method is used to evaluate the creep property of materials at high temperatures. In this study, the specimens used are made of aged P92 steel. The creep property of P92 steel specimens were evaluated using the SP Creep test at a high temperature at 650℃. The precipitation of the aged materials appears more than that of the virgin material in the 9Cr-1Mo steel. Decomposition of lath martensite phase, growth of carbides, and appearance of sub-gain boundary with increasing aging time was also observed in this study. The material degradation degrees of the aged materials at 730℃ for 500hrs is large. This is due to the brittle fracture behavior of the materials caused by the growth of carbides and migration towards grain boundary. However, for those materials aged at 730℃ for 3000hrs, ths degree of degradation was small This shows the recovery fo toughness by decreasing dislocation density and partial recrystallization with increasing of aging time.

목차

Abstract
1. 서론
2. 재료 및 실험 방법
3. 실험결과 및 고찰
4. 결론
후기
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2010-550-002490940