메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
김대종 (한국과학기술원) 오승진 (한국과학기술원) 장창희 (한국과학기술연구원) 김인섭 (한국과학기술원) 김응선 (한국원자력연구소) 지세환 (한국원자력연구소)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2005년도 재료 및 파괴부문 추계학술대회 논문집
발행연도
2005.8
수록면
67 - 72 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Fracture toughness of the fine grain isotropic graphite IG-11 was evaluated. Fracture toughness value, K<SUB>IC</SUB> was obtained by 3-point bending test using SENB specimen. To determine the optimum loading rate, the effects of loading rate on fracture toughness were investigated. The crack initiation point was determined by DCPD method. Weibull modulus of IG-11 graphite was determined by two parameter Weibull equation using test results of 30 SENE specimens. Crack lengths estimated by DCPD method were lower than real crack length because of leakage of current through contacting and non-broken regions within the specimens. Fraction of those area on the cracked surfaces can be inferred from the difference between the crack lengths measured by DCPD and dye penetration method. Contacting and non-broken regions which are mainly induced by shear cracking and crack bridging increase fracture toughness of graphite.

목차

Abstract
1. 서론
2. 실험방법 및 절차
3. 실험결과 및 고찰
4. 결론
후기
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2010-550-003136612