메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
정원복 (한국항공대학교) 부준홍 (한국항공대학교) 곽희열 (한국에너지기술연구원) 천만석 (에이팩)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2001년도 열공학/유체공학 부문 공동 추계학술대회 논문집
발행연도
2001.9
수록면
163 - 168 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (3)

초록· 키워드

오류제보하기
A special working condition of elevated condenser temperature may arise in such case as a solar collector for a medium temperature range. For this case, a heat pipe must be designed properly such that it may transfer a certain amount of heat to the abnormally hot condenser from the evaporator of which the relative temperature potential is not so high as in common applications. In addition, the working fluid properties become unfavorable due to an elevated temperature of the whole heat pipe.
Among many wick structure candidates for this application, a slab wick and a woven-wire wick were selected based on the promising performance data published previously. The thermal performance of heat pipes made of these two wick types were or investigated for comparison. In addition, the performance of a thermosyphon in the same working condition was also investigated for a reference in the comparison study.
The typical range of condenser wall temperature was set between 80 and 120 ℃. The heat pipes were made of 9.53 ㎜ dia. copper tubes. The experimental data of these heat pipes were analysed and discussed in terms of thermal resistance against thermal load and coolant temperature.

목차

Abstract
1. 서론
2. 히트파이프 제작
3. 실험 장치 및 방법
4. 실험 결과 및 고찰
5. 결론
후기
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2010-550-003002040