지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
ABSTRACT
INTRODUCTION
THERMALLY-ACTIVATED WEAR MECHANISM
OBSERVATION AND DISCUSSION
CONCLUSIONS
REFERENCES
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
Spherical Particles Formation in Lubricated Sliding Contact - Micro - explosion due to the Thermally - activated Wear Process -
Tribology and Lubricants
1995 .12
Friction and Wear Analysis of Lubricated Contact within IC-Engines
한국트라이볼로지학회 학술대회
2010 .06
Study on Velocity Dependence of Friction in Low Pressure Sliding Contact under Boundary Lubricating Condition
대한기계학회 춘추학술대회
2013 .05
Study on Quantitative Analysis of Wear Debris for Surface Modification Layers Ti(C,N) with Piston Ring on Diesel Engine Oil
Journal of Advanced Marine Engineering and Technology (JAMET)
2009 .11
미끄럼 운동을 하는 시일과 코팅된 스틸면 사이의 구형입자에 의한 접촉해석
한국트라이볼로지학회 학술대회
2008 .11
시일과 다중 코팅된 스틸면 사이의 구형입자에 의한 미끄럼 접촉해석
한국트라이볼로지학회 학술대회
2009 .06
구형 입자와 경질코팅된 스틸면 사이의 미끄럼 접촉해석
한국트라이볼로지학회 학술대회
2012 .04
미끄럼 거리에 따른 탄성 구형 입자와 스틸면 사이의 접촉해석
한국트라이볼로지학회 학술대회
2011 .04
인공 고관절 골두용 세라믹 복합재료에 대한 세라믹-세라믹 접촉 마멸 특성 분석
Tribology and Lubricants
2005 .10
기계의 상태 모니터링을 위한 최적의 마멸분 영상 획득 방법에 관한 연구
Tribology and Lubricants
2007 .12
미끄럼 거리에 따른 STS 304 스테인리스강의 마멸기구 변화
한국소성가공학회 학술대회 논문집
2012 .10
기계구동계에서 발생된 마멸분의 최적의 형태 분석을 위한 영상의 기준 설정
한국트라이볼로지학회 학술대회
2007 .11
Sliding Contact Analysis of the Spherical Particles Entrapped between Elastomeric Seal and Steel Surface
대한기계학회 춘추학술대회
2013 .05
Shape Study of Wear Debris in Oil-Lubricated System with Neural Network
KTS International Journal
2001 .06
중복 변화하는 미끄럼 속도에서의 마모 거동
한국트라이볼로지학회 학술대회
2010 .11
미끄럼 운동을 하는 시일과 스틸면 사이의 구형입자에 의한 접촉해석
한국정밀공학회 학술발표대회 논문집
2008 .11
Thermally-Activated Technologies for Co-Generation and Environmental Care
에너지기후변화학회지
2006 .04
Deposition Tribology of Nano-period Solid Lubricating Lubricating Films
한국트라이볼로지학회 학술대회
2002 .10
Numerical Design Method for Water-Lubricated Hybrid Sliding Bearings
International Journal of Precision Engineering and Manufacturing
2008 .01
0