메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
공유식 (동의대학교) 임만배 (동의대학교) 이상필 (동의대학교) 윤한기 (동의대학교) 오세규 (부경대학교)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2001년도 제2차 재료 및 파괴부문 학술대회 논문집
발행연도
2001.8
수록면
152 - 158 (7page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The high temperature creep behavior of heat machine systems such as aircraft engines, boilers and turbines in power plants and nuclear reactor components have been considered as an important and needful fact. There are considerable research results available for the design of high temperature tube materials in power plants, based on uniaxial tension creep tests. However, few studies on the Initial Strain Method (ISM) capable of securing repair, maintenance, cost loss and life loss have been made. In this method, a long time prediction of high temperature creep characteristics can be dramatically reduced through a short time experiment. The purpose of present study is to investigate the high temperature creep life of Udimet 720, SCM 440-STD6l and lCr-0.5Mo steel using the Initial Strain Method. The creep test was performed at 400℃ to 700℃ under a pure loading. In the prediction of creep life for each materials, the equation of ISM was superior to those of LMP and LMP-ISM Especially, the long time prediction of creep life was identified to improve the reliability.

목차

Abstract
1. 서론
2. 실험방법
3. 실험결과 및 고찰
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2010-550-002784583