메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
정영기 (성균관대학교) 조금남 (성균관대학교)
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 2010년도 동계학술발표대회 논문집
발행연도
2010.11
수록면
340 - 345 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (6)

초록· 키워드

오류제보하기
The present study investigated the geometric effect on the thermal performance of Heat pipe Heat Exchanger(HPHX) acting as a pre-heater of the absorption system with the refrigeration capacity of 210RT. The HPHX was made of heatpipes with annular fins to preheat the ambient air by taking out heat from the hot exhaust gas. The key parameters were the tube pitch of heat pipe, and annular fin size and pitch around heat pipe. Distilled water was used as a working fluid with the filling ratio of 35%, while the inclination angle of the heat pipe was 10°by considering space limitation and best thermal performance based on the literature. FLUENT, as a commercial code, was used to estimate the thermal performance of the HPHX. Temperature and velocity profiles around the heatpipes and their heat transfer rate were calculated to estimate the thermal performance of the heat pipe heat exchanger. The air temperature over the evaporator section was decreased from 141 to 93℃, and the air temperature over the condenser section was increased from 14 to 90℃. The HPHX was designed as the tube transversal pitch of 49 ㎜, the fin height of 11.9 ㎜ and the fin pitch of 2.3 ㎜.

목차

ABSTRACT
1. 서론
2. 실험 및 해석 방법
3. 실험 및 해석 결과
4. 결론
후기
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2012-553-003954615