메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김병주 (홍익대학교) 김건일 (LG전자)
저널정보
대한설비공학회 설비공학논문집 설비공학논문집 제23권 제1호
발행연도
2011.1
수록면
87 - 94 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Characteristics of two-phase pressure drop in microchannels were investigated experimentally. The microchannels consisted of 9 parallel trapezoidal channels with each channel having 205 ㎛ of bottom width, 800 ㎛ of depth, 3.6° of sidewall angle, and 7 ㎝ of length. Pressure drops in convective boiling of Refrigerant 113 were measured in the range of inlet pressure 105~195 ㎪, mass velocity 150~920 ㎏/㎡s, and heat flux 10~100 ㎾/㎡. The total pressure drop generally increased with increasing mass velocity and/or heat flux. Two-phase frictional pressure drop across the microchannels increased rapidly with exit quality and showed bigger gradient at higher mass velocity. A critical review of correlations in the literature suggested that existing correlations were not able to match the experimental results obtained for two-phase pressure drop associated with convective boiling in microchannels. A new correlation suitable for predicting two-phase friction multiplier was developed based on the separated flow model and showed good agreement with the experimental data.

목차

ABSTRACT
1. 서론
2. 실험 장치 및 방법
3. 실험 결과 및 고찰
4. 결론
후기
참고문헌

참고문헌 (1)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2012-553-003764291